How do I connect my foscam to WIFI?
How to connect a Foscam HD Camera to a wireless router?
- Step 1: Login the camera from Foscam VMS or web browser.
- Step 2: Go to Settings–> Network–> WiFi to configure the wireless connection.
How do I connect my foscam IP camera?
Step 1: connect the IP camera Take the IP camera’s power cable and the network cable (in the case of a WiFi IP camera, you only use that cable for configuration). Plug the power cable into a socket. Plug the other end into the IP camera’s power input. Put 1 end of the network cable in the IP camera.
How do I reset my foscam fi8910w?
1) Press and hold down the RESET BUTTON about 10 seconds. when released the IP camera will be reset back to factory default settings. You must power on the camera before reset.
How do I reset my foscam WiFi?
On a Foscam outdoor camera, the reset button isn’t located on the IP camera itself, but on the bundle of connectors. There’s a black connector with a small white button on the tip. This is the reset button. Press the reset button and hold it for 10 seconds.
How do I change the WiFi on my foscam?
These include characters outside of A-Z and 0-9.
- Step 1: Add the camera to the Foscam App.
- Step 2: Navigate to the Live Video page and click on the Settings icon to proceed to the camera settings.
- Step 3: Find the WiFi Settings Icon and click on it to access the settings page.
How do I find my WIFI cameras IP address?
HTTP://192.168.1.101 represents the IP address of the camera being accessed.
- Find your camera’s IP address.
- Open a web browser and type the IP address.
- Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
How do I reset my Foscam WIFI?
To reset a camera, locate the reset button and press it for approximately 30 seconds. At the end of that time the camera will reboot itself and the factory settings will be restored. Some models require only a 10-15 second timeframe.
What kind of camera does the Foscam fi8910w have?
The Foscam FI8910W Wireless Pan/Tilt Indoor IP Camera features high quality video and audio, wireless N connectivity, pan/tilt, remote internet viewing, motion detection, night vision, embedded IR-Cut filter, as well as a built in network video recording system.
How do I connect my Foscam to WiFi?
1. Install the Wi-Fi antenna by twisting the antenna connector clockwise to the camera’s antenna port (for wireless models). 2. Plug the power adapter into the camera’s power supply port. This may be external (outdoor models) or internal (indoor models) depending on which camera you purchased.
How to contact Foscam support for a problem?
Note: Please contact us immediately if there are any damaged items or if the package is short of any of the accessories listed above. If you have any additional questions or concerns, please feel free to contact us at [email protected] or call us at 1-800-930-0949. [email protected] Page | 2 1-800-930-0949 Table of Contents 1.
What kind of power supply does a fi8910w have?
Rear View The rear of the FI8910W includes a DC 5V/2A power supply port, RJ-45/10-100 Base T port, power and network lights, and input/output audio jacks for external speakers or microphone. [email protected] Page | 6 1-800-930-0949