How do I change the wiper blades on my outlander?
Start on the driver’s side of your Outlander. Most blades are held in place with a tiny clip. Push that clip up towards the arm and push the blade backwards, as if you were sliding it down the wiper arm.
How do you change wiper blade in Supercheap Auto?
For 6.5mm width blades, slide the refill through the top recess. For 8.5mm width blades, slide it through the bottom or widest recess. Whilst holding the blade, cut the refill to the required length, but leave a minimum of 25mm from the end claw. Lift the blade assembly from the windscreen.
How do I change the Assembly on my wiper?
Depress the clip on the underside of the hook to release blade assembly. Slide downwards on arm to remove from hook. Using the old blade assembly, identify the style of adapter required and choose the correct one provided with the new blade assembly. Clip on the adapter, and slide the new assembly onto the arm.
How do you change the refill on a wiper?
Whilst holding the blade, cut the refill to the required length, but leave a minimum of 25mm from the end claw. Lift the blade assembly from the windscreen. In the centre you will notice the point where the assembly pivots on the arm. Depress the clip on the underside of the hook to release blade assembly.
Do you need a new Tridon wiper blade?
The replacement Tridon wiper blade must be compatible with the vehicle’s original wiper blade; the Tridon wiper range has been carefully researched and engineered to suit each specific application. Please refer to the Tridon Part Finder for the correct wiper blade for your application.
For 6.5mm width blades, slide the refill through the top recess. For 8.5mm width blades, slide it through the bottom or widest recess. Whilst holding the blade, cut the refill to the required length, but leave a minimum of 25mm from the end claw. Lift the blade assembly from the windscreen.
Depress the clip on the underside of the hook to release blade assembly. Slide downwards on arm to remove from hook. Using the old blade assembly, identify the style of adapter required and choose the correct one provided with the new blade assembly. Clip on the adapter, and slide the new assembly onto the arm.
Whilst holding the blade, cut the refill to the required length, but leave a minimum of 25mm from the end claw. Lift the blade assembly from the windscreen. In the centre you will notice the point where the assembly pivots on the arm. Depress the clip on the underside of the hook to release blade assembly.
Why do my wiper blades keep getting torn?
Damage can be in the form of frayed or torn wiper blades, or excessive movement, corrosion or frame deterioration to the actual wiper assembly. Changing wiper blades might look easy but it can be a little frustrating if you’ve never done it before.