How do I access my Linksys Wireless G Broadband router?

How do I access my Linksys Wireless G Broadband router?

Next open a web browser window on the connected computer and type http://192.168.1.1 into the address bar and press enter. A window will pop up prompting you for a username and password to access the configuration page for your router. Enter admin for both the username and password.

How do I reset the password on my Linksys Wireless G Broadband router?

Reset Button

1. Press the reset button for 30 seconds.
2. Open up your Web browser and enter “192.168. 1.1” in the address bar.
3. For the login, leave a blank ID and enter “admin” as the password.

How do I reset my wireless G router?

QUICK TIP: For router models such as the Linksys Wireless-B and Wireless-G routers, press and hold the Reset button for 30 seconds. QUICK TIP: Observe the Power light of the router while pressing the button. It should blink or flash as an indication that the router is properly resetting.

How do I use Wireless G Broadband router?

How to Set Up a Linksys Wireless G Broadband Router

1. Connect the broadband Internet modem to the computer using an Ethernet cable.
2. Connect the Broadband modem to the Linksys Wireless G router’s “Internet” port using an Ethernet cable.
3. Plug the router into the power outlet.

How do I put a password on my Linksys Wireless G BroadBand router?

Log in to the web-based setup page of your router by entering “192.168. 1.1” on the Address bar of your web browser. Once a pop-up window appears, leave the default username blank and enter “admin” for the password.

How do I reset my password for my wireless router?

To change your router’s password:

1. Enter your router’s IP address into your favorite web browser.
2. Log in with the default username and password (both admin, usually).
3. Go to settings.
4. Select Change Router Password or a similar option.
5. Enter the new password.
6. Save the new settings.

What does Linksys Wireless G Router do?

The Linksys WRT54G Wireless-G BroadBand Router is a 3-in-1 networking device that lets your whole network share a high-speed Cable or DSL Internet connection. It can act as a wireless access point, a 4-port Ethernet switch, or a router.

What is the default username and password of Linksys router?

admin
The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button.

What’s the default user name and password for Linksys WRT54G2?

Default User name and Password for Linksys WRT54G2 V1, V1.5, V2 Wireless-G Broadband Router, WRT54G V2 V8 V5 V7. Default URL IP : 192.168.1.1. Default Username : Leave Blank. default password : admin.

Where do I Find my Linksys wireless password?

Once a pop-up window appears, leave the default username blank and enter “admin” for the password. Go to the Wireless tab > Wireless Security sub-tab. The wireless password should be beside the Passphrase field for WPA / WPA2 or the Key 1 field for WEP.

How do I change or Reset my router password?

Open your web browser of choice. Type in the username and password that you located through our list below. That’ll do it. How do I change or reset my router password? It might be a good idea to reset your router password and change it in order to prevent the scenario of forgetting it once again.

How do I Reset my wireless router to factory settings?

Reset There are two ways to reset the Router’s factory defaults. Either press and hold the Reset Button for approximately five seconds, or restore the defaults from Administration > Factory Defaults in the Router’s web-based utility. Internet The Internet port is where you will connect your cable or DSL Internet connection.