Do you need OBD-II scanner for Honda Pilot?
All the other stuff (like VTM-4, etc) are manufacturer-specific, thus you need a Honda-specific scanner for that stuff. Basically, if you get a Check Engine light, an OBD-II scanner (that talks ISO9141 protocol), it’ll pull codes for that but nothing else.
What does it mean if your Honda Pilot says p1491?
To determine whether this information applies, contact an authorized Honda automobile dealer. system may become contaminated or clogged. If this or P1491 (EGR valve insufficient lift). clogging and/or EGR valve sticking. P1491 (EGR valve insufficient lift).
What is the ATB code for a 2005 Honda Pilot?
2005 American Honda Motor Co., Inc. – All Rights Reserved ATB 29232 (0507) 1 of 9 and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume this bulletin applies to your vehicle, or that your vehicle has the condition described.
When did I get my Honda Pilot EGR letter?
Tell them TBS 05-026 July 20, 2005, and may not have to bring your EGR letter, but if you have the letter handy, bring with you. Should be free under warranty EGR letter. 2005 American Honda Motor Co., Inc. – All Rights Reserved ATB 29232 (0507) 1 of 9 and training to correctly and safely maintain your vehicle.
What is the fault code for a Honda Accord?
P1297 Electric Load Detector (ELD) Circuit Low Voltage P1298 Electric Load Detector (ELD) Circuit High Voltage P1300 Random Misfire P1324 Knock Sensor Power Source Circuit Low Voltage P1336 Engine Speed (RPM) Fluctuation Sensor Intermittent Interruption P1337 Engine Speed (RPM) Fluctuation Sensor No Signal
What’s the OBD code for a Honda Pilot?
“Please verify these Generic OBD II Code descriptions and testing procedures with an appropriate manual. We do frequently update this Generic Check Engine Light Codes list, but technology is constantly in motion.
When to change maintenance code on Honda Pilot?
I don’t want to be ambushed by the service department when they replace something (like a cabin air filter) on my 2012 that I could have easily done myself had I known ahead of time it was due to be changed soon. Hard to tell them what not to do when I don’t know all that they are going to do.
Why do I get fault code p1735 on my Honda Accord?
On Honda equipped with the four-cylinder engine, the problem could be due to the TCC lock-up solenoid. This may be the problem if you are getting fault code P1735.
What is the fault code for a Honda transmission?
While there are hundreds of possible fault codes, here is a list of the most common Honda transmission fault codes. P0766 “ Failed Shift Solenoid D “ This DTC can be stored when there is a problem with a shift solenoid or the valve body.