Do you have to reset the factory alarm on a Harley Davidson?

Do you have to reset the factory alarm on a Harley Davidson?

Your Harley came with a key fob. If for some reason you do not have the key fob present, but you do have the key, you will need to have reset the factory alarm with your own personal identification number.

What was the problem with my 2007 Road King?

This happened on my 07 street bob. Its likely a loose connection to the neutral sensor. Also the bike would have started with the clutch pulled in, did for mine. No need to pull the batt. The 07 RK’s had bad neutral switches also. I replaced 3 of them.

Is the security light on on a 2007 RK?

Went riding yesterday with a buddy who has a 2007 RK, at somepoint during the ride he noticed the neutral light and the security light “on”, he was in gear and riding all seemed normal.

How to reset the security system on a Harley Davidson touring?

With a proximity fob system, press the left turn signal switch three times and the right turn signal switch once. The blinkers will flash and the PIN should appear in the odometer window. With a push button fob, press the left turn signal three times, then the key fob twice, and the PIN will appear.

Your Harley came with a key fob. If for some reason you do not have the key fob present, but you do have the key, you will need to have reset the factory alarm with your own personal identification number.

With a proximity fob system, press the left turn signal switch three times and the right turn signal switch once. The blinkers will flash and the PIN should appear in the odometer window. With a push button fob, press the left turn signal three times, then the key fob twice, and the PIN will appear.

What happens if you dont Set Your Harley alarm override pin?

With the newer HD Security Systems using proximity FOBs where the key FOB needs to be close to the bike for it to start, this is now more important then ever. If the battery in your FOB dies or it is damaged and you have not set your Harley Alarm Override PIN Code, you will not be starting your bike.

How do you disarm an alarm with a key fob?

Turn the key to “Ignition.” Hold both turn signal switches until you receive confirmation. Enter the first number by pressing the left turn signal the same number of times as the digit. Press the right turn signal once. Repeat steps 3 and 4 until you have entered your PIN. Your key fob will automatically disarm your alarm.

How does the security system work on a Harley Davidson?

The security system on the Harley Davidson Touring allows you to use your key fob to activate it, which prevents you from starting the bike until you deactivate it with your key fob again. Sometimes, you can get stuck and can’t deactivate the security system, or you lost the key fob and want to override it.

How to reset the security code on a Harley Davidson touring?

This article will show you how you can reset the security code, or override the fob on your Harley Davidson Touring. Turn the ignition switch located on the gas tank to “off,” and then turn it to “on.” Figure 1. Turn ignition switch. Press both turn signal switches together and keep them pressed.

Can you start a Harley Davidson without a key fob?

Changing the personal identification number will allow you to start your Harley when you do not have the key fob, or even if the battery in key fob has not been changed. Without resetting your alarm, your Harley will only be a pretty lawn ornament.

Can a factory security system disarm a Harley Davidson?

Yes ( 0 ) Hello Roadking Kevin, The security system reads the fab and will disarm on its own. If the bike came factory with a security system, your owners manual should tell you more. I am unaware of how to completely disarm it if that is what you are looking to do.

This article will show you how you can reset the security code, or override the fob on your Harley Davidson Touring. Turn the ignition switch located on the gas tank to “off,” and then turn it to “on.” Figure 1. Turn ignition switch. Press both turn signal switches together and keep them pressed.

How to use the factory alarm and key fobs?

Hey guys, I just picked up a 2006 Street Bob but the guy did not have the manual for it. How do I use the damn alarm and key fobs i hit the button and now it wont start ! Do you know the code for that bike? yeah I should have it its on the key chain ….

Where is the butonless FOB on a Harley Davidson?

It just has to be kept within the parameter of the antenna , like under the seat where the antenna is located . No need to change the whole $$$$$ sytem over ! chasarms , right but the butonless FOB can be defeated too . It just has to be kept within the parameter of the antenna , like under the seat where the antenna is located .

How to disarm the Smart Security system on a Harley Davidson?

Also, with the battery disconnected in the fob I can keep the fob in one of the bike’s bags without worrying that it’s deactivated the alarm should someone get any ideas of rolling away with it. Every once in a while I use the PIN to disarm the system to help me remember what the PIN is.

How to uninstall the factory security system on a 2005 FXD?

Hello Friends – would anyone know how to uninstall or deactivate the HD factory security system on a 2005 FXD? I hate the damn thing and just don’t trust it. I know it’s just a matter of time before it bites me and I get stranded somewhere. Thanks. I think you will have to have a dealer do that.

How to turn off security system on Harley Davidson?

Pressing the right button one last time after entering the 5th digit finalizes it (skip that for push button fobs), turning off the bike saves it in security system’s memory.

Why do the lights keep flashing on my Harley Davidson?

It’s when the fob is out of range and the bike is “disturbed” a bit and the security activates by flashing the lights like it is supposed to do but the dang lights just keep flashing till I get my fob out of the house and take it close to the bike. Have you tried to turn off the security system and turn it back on.

How do you change the PIN code on a Harley Davidson?

Harley Davidson odometer display. This is also the process to change the PIN code, but be sure to write it down somewhere or use a familiar number before you start. You can change the numbers in the odometer by clicking the left button, and enter it with the right or by clicking the key fob twice, depending on the system.

How do you turn off the ignition on a Harley Davidson?

Turn the ignition switch on-off-on-off-on quickly. With a proximity fob system, press the left turn signal switch three times and the right turn signal switch once. The blinkers will flash and the PIN should appear in the odometer window.

How do you reset the turn signal on a Dyna Glide?

Press left turn signal switch once, and light will flash a number of times to indicate an error code. There is 1.5 seconds between flashes to indicate 1st and 2nd digit of codes and four second pause between codes. Press and hold left switch down for five seconds, and light will flash twice to indicate the TSSM is reset. Turn ignition to off.

Turn the key to “Ignition.” Hold both turn signal switches until you receive confirmation. Enter the first number by pressing the left turn signal the same number of times as the digit. Press the right turn signal once. Repeat steps 3 and 4 until you have entered your PIN. Your key fob will automatically disarm your alarm.

Where is the black meter on a Dyna Fat Bob?

1. Attach your red meter lead to the most positive part of the circuit, which in this case would be the positive post of the battery (5). 2. Attach the black meter lead to the final destination or component in the circuit (solenoid terminal from relay). 3. Activate the starter and observe the meter reading.

Press left turn signal switch once, and light will flash a number of times to indicate an error code. There is 1.5 seconds between flashes to indicate 1st and 2nd digit of codes and four second pause between codes. Press and hold left switch down for five seconds, and light will flash twice to indicate the TSSM is reset. Turn ignition to off.

How do you bypass the FOB on a Harley Davidson?

The process is very easy to do. If your fob is not present, turn the ignition switch to “on” and the security light will begin to flash. Press and hold the left turn signal until you see “Enter PIN” flash on the speedometer.