Can you replace a shift solenoid yourself?

Can you replace a shift solenoid yourself?

Shift Solenoid: REPAIR INFORMATION Replacing a transmission shift solenoid can be done by most any auto repair shop, automobile dealership service center or you can do-it-yourself “DIY”.

Can you drive with a bad solenoid valve?

Can You Drive It? The short answer is that, yes, you can usually drive a car with a bad shift solenoid. Fluid pressure control should continue to function in the gear with the working solenoid, but you should avoid putting any serious stress on the transmission — towing or drag racing — just in case.

How hard is it to change a shift solenoid?

If the damage requires you to replace the entire solenoid pack the cost increases to between $250 and $700. Once your mechanic has the part, it should take between 2.5 and 5 hours to replace the solenoid pack and marginally less time to replace a single solenoid.

How do you unstick a shift solenoid?

What Repairs Will Fix P0752?

  1. Changing the transmission fluid and filter.
  2. Replace faulty solenoid.
  3. Repair or replace a faulty transmission pump.
  4. Repair or replace defective transmission valve body.
  5. Perform transmission flush to clean passages.
  6. Cleaning corrosion from connectors.
  7. Repairing or replacing wiring.

Why do solenoid valves fail?

Solenoid coil failure can be caused by a number of factors. Applying an incorrect voltage to the coil will cause it to fail and may cause the coil to burn out. Electrical surges or spikes may also damage the coil. Sediment or other particles entering the valve may cause coil failure.

Where do you replace a transmission shift solenoid?

To replace a shift solenoid, you have to remove the transmission fluid pan to reach the faulty solenoid. It is located in the valve body. Warning: In some vehicles, you can’t replace just one solenoid, you have to replace the whole solenoid pack.

Which is the best solenoid valve replacement part?

Reliable WR57X10032 Dual Solenoid Inlet Water Valve. Replacement Part Fits for GE, Hotpoint Refrigerator and Replaces 880070, AH304374, EA304374, PS304374, WR57X10040, WR57X10064, B004H3XWPG .

How much does it cost to replace a solenoid pack?

NOTE: On some transmission models, the solenoids are part of a solenoid pack. In these instances, you must replace the entire solenoid pack. The cost for transmission solenoid replacement depends heavily on the type of vehicle you drive. For example, a single transmission shift solenoid can cost anywhere from $15 to $100.

How are the solenoids of a transmission controlled?

A typical automatic transmission uses a number of different solenoids for different purposes. The opening and closing of the solenoids is controlled electronically by the vehicle’s Engine Control Module (ECM) or Transmission Control Module (TCM), depending on the vehicle.