Can you Repad a flute yourself?
Once the flute pad cup is clean, insert a few adhesive pellets into the flute pad cup and apply heat–you need enough to melt the pellets, but nothing more than that. Allow the replacement flute pad to level itself over the tone hole. If need be, adjust the pad with a pad slick or another small, flat piece of metal.
Can I Repad my flute?
If your flute pads are glued in, this step of the process will require some heat to melt the glue. Similarly, if the flute pad is too loose you’ll need a flute pad with a larger diameter. If your flute pads are too thin, flute pad shims can add thickness. If they’re too thick, it’s best to order thinner pads.
How much does it cost to Repad a flute?
Professional Flute Repair and Flute Repad
| Repair Type | Repair ID | Cost |
|---|---|---|
| Flute Repad | STUREPAD | $169.00-225.00 |
| Professional Flute Repad | PROREPAD | $225.00-580.00 |
| Repair Type | Repair ID | Cost |
| Flute Head and Foot Joint Refitting | Swedge | $29.00-60.00 |
Can you use Vaseline on flute?
You should never use cork grease or vaseline on the joints of the flute. The keys themselves should only be oiled by a professional instrument repairer. The two joins on the flute (between the headjoint, the body and the footjoint) don’t need lubricating per se, but sometimes they can get a bit tight.
How often do flute pads need to be replaced?
Flute pads typically last 3-6 years, depending on how often you do the maintenance. Make sure to keep your flute clean and dirt-free, and don’t forget to do yearly maintenance to improve the life of your flute pads and flute. This will save you future costs on repadding your flute.
How long should flute pads last?
The pads are the least of your problems. Let’s keep it that way. Properly installed regular type flute pads can last 5 to 10 years or more, if not damaged.
Do flutes need maintenance?
Your flute should be cleaned, oiled, and adjusted at least once a year by a qualified flute repair technician. Regular maintenance will not only keep your child’s flute in tip-top shape, but it can also prevent minor issues from becoming more expensive ones.
Do flutes need to be oiled?
Oiling. Oiling the instrument should be done three to four times during the first month, and once a month after that However, if the bore or the ends of the tenons look dry then don’t hesitate to oil the flute on a more regular basis. It is not necessary to oil the inside of the head joint.
Do flutes get better with age?
Because of how the flute is set up, what it is made out of, and the mechanism and different things that we have, they’re not worth more, they’re not higher quality the older they get. So, just so that you know – an old flute is not a better flute.
What’s the best way to replace a flute pad?
Only carry this step if all the keys are perfectly leveled with no leaks. Dampen the front of the flute pad with a little water and pad slick. Use key wedges to shut the keys as you leave it to fully dry overnight. Work gently so you don’t damage any part of your flute the cork or bend the flute keys.
What should I do when I take my Flute off the case?
Do not grab the body of the flute by its keys when removing it from the case. Instead, grasp it by the tenon section, where you won’t put stress on the springs. Remove the head piece in a similar fashion. Avoid contact with the nickel-silver portion of the tenon when holding the head piece.
Is there An Illustrated Guide to flute repair?
Written for college professors and students, as opposed to professional repair technicians, this illustrated document offers step-by-step procedures to guide readers through standard repairs and maintenance. All chapters use four-color illustrations and offer practical repair techniques in a tight sequential order.
How can I repair the D key on my Flute?
Remove the rail that has the F, E, and D keys. The long rail can budge to the left enough for the shorter rail to slip out. The D key should be free to slide from the rail. Be sure not to lose it! Push the rail out of the small groove. Weave the two trill keys (D and D#) out from underneath the springs. It’s OKAY if they bend.