Can you keep a stern drive in the water?
To keep water from entering the exhaust hub when storing your sterndrive, leave it in the “down” position or use a waterproof cover.
How does a sterndrive motor work?
The outdrive resembles the bottom half of an outboard motor and is composed of two sub-units: an upper containing a driveshaft connected through the transom to an engine which transmits power to a 90-degree-angle gearbox; and the lower containing a vertical driveshaft receiving power from the upper unit gearbox.
How long does a stern drive last?
It’s also common to expect between 10-15 years out of a well-used sterndrive and transom assembly, and then it’s a matter of continual repairs or replacing it once and for all.
Are stern drives any good?
Are sterndrives reliable? Yes, provided correct maintenance procedures have been carried out at the required intervals. Sterndrives on trailer boat applications are more reliable than permanently moored sterndrives.
Can you Wakesurf behind a stern drive?
Inboard boats, including direct drives and V-drives, are the only types of boats you can safely wakesurf behind. To recap, you should ONLY wakesurf behind an inboard board, never behind an outboard or inboard/outboard (stern drive) due to the risk of making contact with the propeller and the proximity of the exhaust.
Is a stern drive good?
The advantages to a sterndrive are the vessel design and ability to offer larger horsepower options. With a lot of fishing boats, the rear deck space and access is important. For those looking to do water sport, it can be beneficial having a rear swim platform without a motor protruding in the middle.
How do you service a stern drive?
Stern Drive Maintenance
- Make a Checklist.
- Check Fluid Levels.
- Fill the Fuel Tank.
- Bring the Engine Up to Temperature.
- Change the Engine and Stern Drive Lubricant.
- Lubricate All Greasable Points.
- Replace the Fuel Filter Elements.
- Inspect Hoses and Belts.
Whats better outboard or stern drive?
If you want a transom for water play, the smart move is to get the sterndrive. If you want better corrosion resistance and easier maintenance, plus drives that can be trimmed clear of the water, go for the outboards. It’s your call, and with the Aviara AV32, either choice is a winner.
Can you Wakesurf behind a bowrider?
You can indeed ride a surfboard behind an outdrive safely using a tow rope. Wakesurfing with a rope is done at a distance and rope length similar to wakeboarding, making it unlikely for you to ride the wave down into the outboard’s prop.
How hard is wakesurfing?
Getting up on a Wakesurf board is easy learn. Wakesurfing is a low impact, fun and social watersport. Wakesurfing is much easier to learn because of how slow the boat is moving, usually not more than 12mph, and because the rider is so close to the boat when they are learning.
How does a stern drive on a boat work?
Fresh seawater is normally drawn by a belt driven pump from a thru hull fitting in hull of boat on inboards, or by water pump in stern drive through the lower unit water passages on an inboard/outboard, and then exits the boat through the exhaust.
How does a stern drive cooling system work?
Fresh seawater is normally drawn by a belt driven pump from a thru hull fitting in hull of boat on inboards, or by water pump in stern drive through the lower unit water passages on an inboard/outboard, and then exits the boat through the exhaust. Figure 2 shows the typical “enclosed” cooling system.
What’s the best way to maintain a stern drive?
Herein lies the real weaknesses of the stern drive. The key to good stern drive maintenance begins at day one with a properly applied anti fouling.
How much does it cost to replace a stern drive?
Anyone who has owned a stern drive boat or two knows how troublesome and costly stern drives can be. A typical drive replacement runs $2,500 or more, and with a twin engine boat you’ve got more than $5,000 worth of machinery hanging off the back of the boat.
Fresh seawater is normally drawn by a belt driven pump from a thru hull fitting in hull of boat on inboards, or by water pump in stern drive through the lower unit water passages on an inboard/outboard, and then exits the boat through the exhaust.
Fresh seawater is normally drawn by a belt driven pump from a thru hull fitting in hull of boat on inboards, or by water pump in stern drive through the lower unit water passages on an inboard/outboard, and then exits the boat through the exhaust. Figure 2 shows the typical “enclosed” cooling system.
What’s the difference between a stern drive and out drive?
A sterndrive is a marine propulsion system that is attached to a sterndrive, also known as an outdrive. The drive unit is both the transmission and propulsion. When the captain turns the steering wheel, the entire drive turns. No rudder is needed.
Where is the engine located on a stern drive?
A sterndrive or inboard/outboard drive ( I/O) is a form of marine propulsion which combines inboard power with outboard drive. The engine sits just forward of the transom while the drive unit ( outdrive or drive leg) lies outside the hull .