Are color changing pool lights worth it?
An LED light will save you roughly 75% on your energy usage compared to a comparable incandescent light. REMEMBER, that LED pool lights cost more, on average, than a simple incandescent light so your cost savings will not start till you recoup the additional money that you spent on the LED lights.
How do I change the color of my LED pool light?
Flipping the switch initially turns your light on. Turning the switch off then on again will set the light to the second color. Repeating this procedure allows you to cycle through the various colors and light shows easily. Keep turning the switch off then on again until you have reached your desired setting.
How long does an LED pool light last?
Your pool lighting should give you few problems overall. Most incandescent bulbs will burn for 1,000 hours before bulb replacement is necessary. LED bulbs can burn for 25 years or more (or so they tell us).
Why won’t my pool lights change color?
Some pool lights that change colors rely on small motors that rotate a multicolored lens so different portions of the lens filter the light being emitted by a single bulb. These lights are susceptible to motor failure, which will allows them to function normally but without any color change.
How much does it cost to install LED pool lights?
As this is being written, a full sized LED pool light usually cost between $450 and $650 installed. If you go for the smaller LED lights you’re looking at $300 to $500 installed. When you have full-size incandescent pool lights they are in the range of $450 to $650.
Can I replace my old pool light with LED?
You need to upgrade to a cost efficient color changing LED pool light with energy saving of over 80%. This guide will show you how to convert by simply changing the bulb in your pool light fixture to a J&J Electronics Color Splash Bulb.
Can you replace incandescent pool light with LED?
Most of the older incandescent and halogen pool lights can be changed to the newer LED color changing lights by replacing the entire light fixture. But there are a limited number of old lights that can be converted to LED light by simply replacing the old light fixture bulb with a color changing LED light bulb.
How much does it cost to replace a swimming pool light?
The cost to replace pool lights is $625 apiece on average. Pool light repair costs are much more affordable at $65 to $150 each. Just replacing the bulbs is $20 to $100 for each one depending on their type and functions.
Do you have to drain pool to change light?
Replacing your in-ground swimming pool light does not require draining the water from the pool or hiring a professional. The design of the pool light’s housing allows you to remove it from the pool without the need to disconnect any wiring.
How do you replace a light bulb in a swimming pool?
How to Replace Your Pool Light Bulb Step 1: Assemble Tools and Supplies Step 2: Turn Off Electricity Step 3: Remove Light From Pool Step 4: Disassemble Light Housing Step 5: Replace Bulb and Reassemble Light Housing Step 6: Return Light to Pool
How do you replace underwater pool lights?
Replacement underwater pool lights are easily installed by screwing them into the fixture like any other light. Replace the lens, the frame and the cover. Turn the power back on and make sure the light works prior to refilling the pool.
What size is a pool light?
The most basic illumination you can get, incandescent white lights come in two sizes, one designed for pools at about 9 – 11 inches in diameter and a smaller one for spas with a diameter of about 5 – 6 inches. The exact size will depend upon the make and model as this varies from one manufacturer to another.
What is pool light?
The primary function of a LED pool light is to bring about or enhance the lighting in pool water. Most, if not all of this type of pool light are waterproof. However, some models specifically require installation above water. Underwater LED Pool lights, on the other hand, can also be used over water.