Why won t my padlock close?
The most common is that the lock cylinder won’t properly turn with the key inserted. If you are, then the lock’s internal parts may be frozen from cold or stuck because of rust or grime. These same causes can also cause the lock shackle to open and close improperly, or prevent the open shackle from rotating freely.
How to fix a stiff door lock?
Put a little amount of graphite powder inside the door lock to ease any friction inside, making sure not to put in too much. You’ll also want to put some of the powder onto both sides of the door key. If you don’t have any graphite powder you can use a pencil.
What should I do if my Toyota 4Runner door lock is not working?
You will/should hear a clicking sound as the plastic clips come away from the door. Once the door is freed, look for a wire connecting the power door locks to the interior door mechanism. Unhook this cord.
What’s the problem with my Toyota 4 Runner?
Hi I have a 2000 toyota 4 runner and my power door lock does not work. Drivers side door lock. It unlocks with the remote and the door switch but will not olck with either. I replaced the switch on the key lock in the drivers door and the accuater motor in the door lock latch and checked all the fuses everthing is good.
What to do if your power door lock is not working?
Power door locks are great when they work and not when they don’t. The best way to get them working again is to start with a proper diagnosis of what’s going on. Carefully take some time to correctly determine what is working and what isn’t.
Where is the fuse on a Toyota 4Runner?
The relay is on an electronics board under the dash. In order to replace it, you will need to solder on a replacement part. If you don’t have electronics repair skills or background, this is not something you should tackle yourself. A blown fuse is a pretty simple fix.