Why won t my GSXr start?
Check the starter relay fuse, which is tucked up under the tail fairing just behind the battery. Remove the relay’s plastic cover. Test the fuse by turning on the GSXR’s ignition, putting one end of the test light on the negative terminal of the battery and the other end on each side of the relay fuse.
How do you start a Suzuki?
With your foot off the accelerator pedal, crank the engine by turning the ignition key to “START”. Release the key when the engine starts. CAUTION: Stop turning the starter immediately after the engine has started or the starter system can be damaged.
What to do if your GSXR won’t start?
First, John will show you where to locate the starter solenoid and fuse on the GSXR starting system and then test them. If it fails, you can replace the fuse with the extra fuse located on the machine or with a new fuse from partzilla.com. If that doesn’t work, the problem may be in the starter relay.
Why does my motorcycle not start when I turn it on?
Clogged Injector Symptoms of a clogged injector: Your motorcycle will attempt to turn over normally when you try to start it but there won’t be any combustion. If you know it’s sparking correctly and that there is gas in the tank but it has been sitting for a while, your culprit is probably a clogged fuel injector.
Why is the gas tank on my motorcycle not starting?
If you know it’s sparking correctly and that there is gas in the tank but it has been sitting for a while, your culprit is probably a clogged fuel injector. You can also manually inspect your fuel injectors. If they look dirty and clogged, that means they need to be cleaned or replaced.
Why does my motorcycle not start with a cracked spark plug?
When a cracked spark plug is installed, the spark will find the least path of resistance through the crack and ground out to your engine block instead of going all the way down to the end of the spark plug and jumping across the gap like it’s supposed to.