Why is the time on my radio clock not working?
This appears to be a manufacturing defect which does not rear its ugly head until the clock has been in operation for more than a year. I bought the radio clock primarily as a clock, and now I cannot tell time on it…. Same here screen display stop working after two years of service. Same here. Also within 2 years of purchase.
Where can I get a radio controlled clock?
The signal operates on a frequency of 60 kHz and carries a time and date code that can be received and decoded by a wide range of readily available radio-controlled clocks. The MSF radio signal is transmitted from Anthorn Radio Station in Cumbria by Babcock (formerly VT Communications), under contract to NPL.
How can I reset the clock on my Radio?
1. Unplug clock/radio 2. Take batteries out of bottom of radio (unscrew and remove batteries, you may not have realized there were batteries!) 3. Wait 20-25 minutes for clock/radio to ‘reset’ 4. Plug clock/radio back in 5. Viola!! IT WORKS! 6.
How to fix a time display on a iHome radio?
I called the iHome Audio people (I-800-288-2792) – You may want to call because there may be different instructions for different models but this is what they told me to do: 1. Unplug clock/radio 2. Take batteries out of bottom of radio (unscrew and remove batteries, you may not have realized there were batteries!)
How to fix the clock on my Radio?
Take batteries out of bottom of radio (unscrew and remove batteries, you may not have realized there were batteries!) 3. Wait 20-25 minutes for clock/radio to ‘reset’ 4. Plug clock/radio back in 5. Viola!! IT WORKS! 6. The woman at iHome Audio said if it works then you can put batteries back in, if it doesn’t work call them back.
What to do if your radio says Erre only?
If it is due to the wrong code then you have to disconnect the battery for over 30seconds although go for 5 minutes to be sure. Power up the radio and then Code should appear again. Highly active question. Earn 10 reputation in order to answer this question. The reputation requirement helps protect this question from spam and non-answer activity.
Is the clock at the bottom of the screen unreadable?
Clock display is unreadable. Calendar info at the bottom of the screen is ok. Answered! View the answer I have this problem too Is this a good question? I had the same problem!
I called the iHome Audio people (I-800-288-2792) – You may want to call because there may be different instructions for different models but this is what they told me to do: 1. Unplug clock/radio 2. Take batteries out of bottom of radio (unscrew and remove batteries, you may not have realized there were batteries!)
Why is my Clock Control Board not working?
If the control board is getting power, then it will certainly need to be replaced since it will not light up. You can order the clock control board from the website. The part number for that clock control board is WB11K10012R.
Why is the backlight on my laptop not working?
You may have replaced the backlight once or twice before because the backlight often disturbs the display when it is being used for a longer time. Another problem can be the defective LCD, which is a common cause for the display to stop working.
Clock display is unreadable. Calendar info at the bottom of the screen is ok. Answered! View the answer I have this problem too Is this a good question? I had the same problem!
This appears to be a manufacturing defect which does not rear its ugly head until the clock has been in operation for more than a year. I bought the radio clock primarily as a clock, and now I cannot tell time on it…. Same here screen display stop working after two years of service. Same here. Also within 2 years of purchase.
If the control board is getting power, then it will certainly need to be replaced since it will not light up. You can order the clock control board from the website. The part number for that clock control board is WB11K10012R.
Why is my atomic clock not working at night?
If you are using rechargeable batteries, they may not be giving the remote sensor the juice it needs to perform properly. The clock may need a tune up manually if it still can’t find the signal. The signal transmission from Fort Collins is strongest at night when the sun’s rays don’t interrupt the strength as much.
What should I do if my remote clock is not working?
If you use a remote sensor to receive information to your clock, check that it is not malfunctioning, caked with dirt or has had its casing compromised due to inclement weather. If all else fails, check the batteries. If you are using rechargeable batteries, they may not be giving the remote sensor the juice it needs to perform properly.
What to do if your radio display is not working?
The first is you could replace it with an aftermarket one. The second is you can get a replacement radio at the dealer. Which are usually about 200 dollars. And your third option is, that you can get a kit off of ebay to repait the display. You will need to disassemble the radio to repair it with the kit.
What would cause radio display / touch screen to go blank?
What would cause radio display/touch screen to go blank? the display blinked and went out now is blank, also has heaters ans ac controls, is touch screen and is blank. I am not sure what would cause it, but I have a couple of solutions you could try.
Why is the time display on my laptop not working?
This time it is not working. I unplugged it and took the battery out and left it that way for a whole day. When I plugged it back in, the display is almost unreadable. Anyone figured out a more involved fix?
Is the clock on the radio still working?
The music still plays, but I cannot see the The radio/clock display is not working, but the radio is… The light illuminaing the radio and NAV system will not light up. Radio works I just don’t know what station I’m playing etc.
The first is you could replace it with an aftermarket one. The second is you can get a replacement radio at the dealer. Which are usually about 200 dollars. And your third option is, that you can get a kit off of ebay to repait the display. You will need to disassemble the radio to repair it with the kit.
What kind of light does a clock radio use?
7 lighting options such as indigo, yellow, purple, green are available with 7 natural sounds to support the sunrise simulation of this radio. The light will go on gradually from 10% to 100% brightness in 30 minutes before your preset alarms. I love how you can adjust this function to 10 or 20 minutes as preferred.
How does the Sunrise clock radio work in the dark?
You only need to press the sunlight button on its upper left to switch to this lamp mode. Its soft lighting is effective for you to feed your baby or read a book in the dark. Although the sunrise clock radio offers an automatic FM channel scan, it will set random stations as presets, which changes every time you try this function.