Why is the speedometer on my Mercedes not working?
An instrument cluster ain’t cheap!! Upon checking further—-all four speed sensors would have to fail for the speedo IC computer to read “0”. Additionally the traction control modules are the modules that provide the rpm data for the IC via the CAN. Therefore it could mean that the data is not getting to the IC.
What are the problems with a Mercedes Benz?
Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More …
What should I do if my Mercedes Benz won’t start?
Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.
Why is my Mercedes-Benz transmission not shifting?
If cracks develop between the two chambers, coolant will mix with transmission oil and it will destroy the transmission. This has been a well-documented issue for Mercedes-Benz cars equipped with the Valeo radiators.
What do I need to troubleshoot my Mercedes Benz?
Troubleshooting fuel related problems is not very difficult and you can check the fuel pressure yourself. Checking the fuel pressure is very simple. For this test, you will need a fuel pressure gauge. What you need is a fuel pressure gauge with Schrader valve adapter.
Where to take a Mercedes Benz for a diagnostic test?
Your best bet is to take it to a qualified Mercedes-Benz specialist at a reputable Mercedes-Benz service center for some diagnostic testing whenever possible.
What causes a Mercedes Benz to not start?
In most cases you will get a fault code related to one of the following: 1 ECM / PCM computer failure 2 Camshaft position sensor 3 Shifter Selector module 4 Fault codes related to driver authorization or immobilizer 5 Electrical problems
How much does a Mercedes Benz ABS sensor cost?
Each of the four wheels has a ABS sensor. They are not difficult to replace. A quick search online yielded many choices on Mercedes-Benz ABS sensors some as low as $30, but the actual price depends on the Mercedes-Benz Model that you have.
Why is the odometer not working on my Mercedes 300SE?
My ‘new’ 300SE suffered from a common problem with Mercedes of that era, a non functional odometer. The mechanical odometer is driven by a small electric motor instead of a traditional speedometer cable and associated gears. This is because the speedometer is electric yet the odometer is mechanical.
What kind of odometer does a Mercedes W126 use?
This combination was common in the late 80s and early 90s before cars moved to fully electric speedometers and odometers. The Series II W126 uses a VDO odometer unit shared with many Mercedes and BMW models of the era.
How does the speedometer and odometer work?
This is likely related to what is called a speed input/output shaft sensor which is a sensor mounted down on the transmission that monitors the speed of the output shaft of the transmission. This is relayed to your ECU which produces this information in your speedometer and odometer.
Why is the instrument panel on my Mercedes not working?
The instrument panel on my 2000 (update) CLK320 is refusing to work. Basically nothing works – no warning lights, no digital display, no speedo. The only things that do work are the high beam indicator lights and the indicators. The car starts and drives ok though. Checked the fuses and they all look ok.
Why is the gas gauge not working on my Mercedes?
ONE THING I HAVE NOTICED is that when i turn the key all the way to the power position (the last point before turning car on) the instrument panel lights up fine , the gas gauge works annd shows me how much gas there is and i can navigate through, however when i tuen the car on it Iinstrument cluster ) DIES OUT…
Are there any indicators on a Mercedes Benz?
Basically nothing works – no warning lights, no digital display, no speedo. The only things that do work are the high beam indicator lights and the indicators. The car starts and drives ok though.
What kind of car does the speedometer not work?
I have a 2003 SLK320 with the 6 speed manual transmission. My speedometer stops working sometimes but works other times. When it is hot outside and sunny, it always works. When the sun isn’t beating down on my car and the engine isn’t warm, it usually doesn’t work.
The instrument panel on my 2000 (update) CLK320 is refusing to work. Basically nothing works – no warning lights, no digital display, no speedo. The only things that do work are the high beam indicator lights and the indicators. The car starts and drives ok though. Checked the fuses and they all look ok.
Basically nothing works – no warning lights, no digital display, no speedo. The only things that do work are the high beam indicator lights and the indicators. The car starts and drives ok though.
ONE THING I HAVE NOTICED is that when i turn the key all the way to the power position (the last point before turning car on) the instrument panel lights up fine , the gas gauge works annd shows me how much gas there is and i can navigate through, however when i tuen the car on it Iinstrument cluster ) DIES OUT…
Do you need dipstick to check Mercedes transmission?
The car doesn’t come with a dipstick to check the transmission level but you can order one online for under $20. You will need Dipstick Tool for 722.6 722.9 Mercedes-Benz Transmission for measuring fluid level. Watch the video below to learn how to check the transmission fluid level on your Mercedes-Benz.
What to do when your Mercedes goes into limp mode?
You may also get a check engine light if your transmission goes into limp mode. When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level.
Where are the transmission codes stored in a Mercedes?
Specific codes related to the transmission are stored in the TCU (Transmission Control Unit) and come generic codes such as P0705 are stored in ECU (Engine Control Unit). You don’t need to pay anyone to read the codes; you can retrieve them yourself in a couple of minutes with the right OBD II scanner.
An instrument cluster ain’t cheap!! Upon checking further—-all four speed sensors would have to fail for the speedo IC computer to read “0”. Additionally the traction control modules are the modules that provide the rpm data for the IC via the CAN. Therefore it could mean that the data is not getting to the IC.
The car doesn’t come with a dipstick to check the transmission level but you can order one online for under $20. You will need Dipstick Tool for 722.6 722.9 Mercedes-Benz Transmission for measuring fluid level. Watch the video below to learn how to check the transmission fluid level on your Mercedes-Benz.
You may also get a check engine light if your transmission goes into limp mode. When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level.
Specific codes related to the transmission are stored in the TCU (Transmission Control Unit) and come generic codes such as P0705 are stored in ECU (Engine Control Unit). You don’t need to pay anyone to read the codes; you can retrieve them yourself in a couple of minutes with the right OBD II scanner.
Why is my Mercedes C class not shifting?
Change the battery and reset ALL of your error codes (usually requires a technician not just disconnecting your negative Batt. connection) and your car will be back in shape. If this doesn’t work, then the problem could be with the transmission control module. Sometimes the trans. leaks fluid on the module and ruins the circuits.
What kind of transmission does a Mercedes C230 have?
76 people found this helpful. i have a Mercedes c230 model 1999 with auto electric Transmission: it’s stuck in 1 gear and dose not change the gears!! when i pull on gear it shake’s all the car… i’m based in kabul Afghanistan unfortunately there is no any good mechanic for Mercedes to know the problem of it!!
Why does my Mercedes Benz not shift out of lower gear?
The later model mercedes benz have an electronic gear shift assembly and I would not have a soda or coffee spill over the gear shift console because it will short the assembly out and your car transmission will not shift out of lower gear or will stay in a lim mode or you can manually shift to the D by depressing the buttom on the console.
How does the speedometer work and transmission doesn’t shift?
Speedometer doesn’t work and transmission doesn’t shift gears. The speedometer stays at 0 all the time. When the transmission is in drive it won’t come out of 1st gear. Reverse works fine, and if I manually put the transmission in 1st or 2nd it works fine. 102 people found this helpful.
Why does my speedometer not work on my GMC Sierra 1500?
– CarGurus Speedometer doesn’t work and transmission doesn’t shift gears. The speedometer stays at 0 all the time. When the transmission is in drive it won’t come out of 1st gear. Reverse works fine, and if I manually put the transmission in 1st or 2nd it works fine.
If cracks develop between the two chambers, coolant will mix with transmission oil and it will destroy the transmission. This has been a well-documented issue for Mercedes-Benz cars equipped with the Valeo radiators.
Why does my GMC Sierra 1500 not shift gears?
GMC Sierra 1500 Questions – Speedometer doesn’t work and transmission doesn’t shift gears. – CarGurus Speedometer doesn’t work and transmission doesn’t shift gears. The speedometer stays at 0 all the time. When the transmission is in drive it won’t come out of 1st gear.