Why is the resistor not working on my blower?

Hi There, The resistor is what controls the speed of the blower motor, not the relay. The blower motor relay supplies power to this motor when you turn the switch to “on” that can sometimes fail. When this happens, you may notice that you will not feel anything blowing out of the vents at all.

What are the symptoms of a bad heater motor resistor?

Symptoms of a Bad or Failing Heater Blower Motor Resistor. 1 1. Blower motor stuck on one speed. A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. The blower 2 2. Blower motor does not work on certain settings. 3 3. No air from the vehicle’s vents.

Where is the relay on a blower motor?

Correction assuming 97 is same (probably is)… Fan relay is as posted before on top of the duct work left of the resistors you can see both behind the glove box if you take it out. The purple wire comes from the relay/resistors according to fan speed selected.

What does the resistor on a heater do?

It is responsible for controlling the blower motor’s fan speed. When fan speed is changed via the knob on the instrument cluster, the blower motor resistor changes setting, which changes the speed of the blower motor.

What happens when a heater motor resistor fails?

If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored. 2. Blower motor does not work on certain settings

How do you test a blower motor resistor?

The added resistance in the circuit slows down or speeds up the blower motor as needed. Locate the fuse for the blower motor in the owners/service manual. Test the fuse, with the ignition key on, using the 12-volt test light.

Why is my blower motor resistor not working?

If there is power indicated on high blower speed, but not low or mid range, the problem is the blower resistor. Test for ground at the blower motor if there is power indicated at all ranges, but the motor does not function.

Why does my AC blower motor not work?

The blower motor relay supplies power to this motor when you turn the switch to “on” that can sometimes fail. When this happens, you may notice that you will not feel anything blowing out of the vents at all. This may also cause the blower motor to work intermittently.

What should I do if my blower motor stops?

Replace blower motor. If you have a variable speed blower motor, replace the blower motor speed control module. If you have a three or four speed blower motor, remove the blower motor relay. If the motor stops, replace the relay. Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period.

How are the resistors arranged in a blower motor?

Heating systems with just 3 or 4 speeds use a motor resistor along with the speed switch to regulate the motor speed. The resistors are arranged in series to reduce the voltage in steps, depending on where in the series you apply power. Blower resistors can burn out. When that happens, you lose that speed.

What causes a blower fan to not work?

When this happens, you may notice that you will not feel anything blowing out of the vents at all. This may also cause the blower motor to work intermittently. A blower fan is connected to the negative battery terminal (also called ground) on one end and to the positive battery terminal through a blower motor resistor on the other end.

Where does the power go in a blower motor?

For each higher speed, power flows through one less resistor. Some car makers run blower motor power through the fan speed switch first, then through the blower motor resistor and then to the blower motor and ground. Other car makers reverse that and run power to the blower motor first and terminate ground at the blower fan speed switch.

How is a blower fan connected to a battery?

A blower fan is connected to the negative battery terminal (also called ground) on one end and to the positive battery terminal through a blower motor resistor on the other end. The blower resistor is connected in series to the blower fan motor.

Why is the blower motor not working on my car?

My car has an automatic transmission. Hi There, The resistor is what controls the speed of the blower motor, not the relay. The blower motor relay supplies power to this motor when you turn the switch to “on” that can sometimes fail. When this happens, you may notice that you will not feel anything blowing out of the vents at all.

How much does it cost to replace a blower motor resistor?

The blower motor resistor or control module replacement is not very expensive. For example, one of our colleagues had a problem with his 2011 Ford Escape: the fan only worked at the speed 4. He paid $50 to diagnose and $112 to replace the resistor at a local Ford dealership.

Where is the blower motor resistor located on a car?

It’s located inside the dash, often on the opposite side of the steering wheel or inside the engine compartment on the firewall. A blower motor resistor or a blower motor control module is the part that controls the speed of the blower motor.

What are the symptoms of a bad blower motor relay?

One of the first symptoms of a bad or failing AC blower motor relay is a blown AC blower motor relay circuit fuse. If the blower motor relay develops any sort of problem that hinders its ability to properly limit and distribute power, it may cause the blower motor fuse to blow.

What does a blower motor resistor do?

Definition. A blower motor resistor, typically located beneath the passenger side dashboard, contains three resistors, or sets of terminals designed to generate voltage in proportion to electrical current. These resistors allow the blower motor to function at lower speeds.

Where is the blower motor resistor located?

The blower motor resistor is located under the dash on the right hand (passenger) side. It’s near the firewall, just below the windshield.

What is an AC resistor?

Resistor AC Response. For ordinary currents and frequencies the behavior of a resistor is that of a dissipative element which converts electrical energy into heat. It is independent of the direction of current flow and independent of the frequency. So we say that the AC impedance of a resistor is the same as its DC resistance.

Can a blower fan be replaced at the same time?

Also use an ammeter to check that the blower is not drawing too much current when on high speed. a blower fan that’s on its way out or has an internal short can cause these modules/connectors to fail prematurely. Not a bad idea to just go ahead and replace your blower at the same time if you’re making this repair.

Symptoms of a Bad or Failing Heater Blower Motor Resistor 1 Blower motor stuck on one speed A common symptom of a faulty blower motor resistor is a blower motor that is stuck on… 2 Blower motor does not work on certain settings Another common symptom of a faulty blower motor resistor is a a blower… 3 No air from the vehicle’s vents More

What causes a blower motor to not work?

If the blower motor resistors’ internal components fail it may cause the blower motor to malfunction, or not function at all on one or more of the settings. This can also be caused by a blower motor switch, so a proper diagnosis is highly recommended if you are uncertain of what the issue may be.

Why does my AC fan only work on high?

Your AC only working on high probably has to do with the blower motor resistor. It controls the speed of your fan and if it brakes it will only work on high. Try replacing that resistor first to see if you regain control of the fan speeds.

What to do if your AC heater fan is not working?

AC/Heater Blower Fan not Working – Motor or Resistor? Quick Fix If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

The blower motor resistor controls the speed of the blower motor indirectly by relaying electrical current to the blower motor control module. If the resistor isn’t working properly, then you’ll experience concerning and inconvenient symptoms in your BMW’s cabin.

What to do if your blower fan is not working?

Blower Motor Resistor Replacement – YouTube Blower fan not working – 2004-2014 Ford F-150 and other models. Blower Motor Resistor Replacement If playback doesn’t begin shortly, try restarting your device.

Why is my car AC not blowing or car fan not working?

It sounds like your blower motor or fan is damaged. The noise you heard was probably the fan blades hitting the side of your ventilation ducts and it suddenly stopped when either the motor failed or the fan finally got stuck. Replacing the blower motor and possibly fan should get you back to having AC!

What does it mean if your blower motor is not working?

Average rating from 849 customers who received a AC is not working Inspection. The blower motor resistor is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed.

When do you need to replace the blower motor relay?

If the blower motor does not function, car fuses are blown, or relays are melting, you may have to replace the car blower motor relay. 1. Blower motor does not function 2. Blown fuses 3. Melted relay The blower motor relay is the electrical switch that is used to supply the power for the vehicle’s blower motor.

What causes a fuse to blow on a blower motor?

If the blower motor relay develops any sort of problem that hinders its ability to properly limit and distribute power, it may cause the blower motor fuse to blow. Any sort of electrical spikes or excessive current from a bad relay will blow the fuse and cut power in order to protect the system.

Is the speed of the blower controlled by the resistor?

The blower speed can be adjusted in almost every modern car. Some cars have blowers that have 4 to 5 fixed speed settings that can be selected, but in this case, the speed of the blower motor is controlled by a blower motor resistor. 1. No air blowing through vehicle’s vents

Why does my blower motor only work at slow speed?

Blower motor only working on low speed. Another common symptom of a faulty blower motor resistor is that the blower motor only works at slow-speed. This can be caused because of bad wiring between the blower motor resistor and the blower motor itself.

How is the speed of the blower motor controlled?

The blower resistor is connected in series to the blower fan motor. This means that the current running through the blower motor, and its’ speed is therefore controlled by the resistor value. The user chooses a fan speed by selecting a speed which then connects one of the resistors in the blower resistor pack.

What makes a fan blower motor not work?

There was no rust in mine. A lot of dark black brush residue, couple pieces of what appeared to be small leaves, and dirt. The fan motor parts themselves were very clean after I knocked on the concrete floor to knock the debris out. I think the lube and cleaning made the difference.

What to do if your car fan is not working?

Put the fan blade back on, gave it a couple of spins to ensure the motor turned freely and plugged it back it. And it worked! :fantastic: I thought I was in over my head but it came back together. Next day the fan worked. And the day after that and so on. Problem solved. Makes a tiny bit of noise but is barely noticeable when driving.

CLICK HERE TO RESET YOUR PASSWORD! Help! Fan quit working on all 4 speeds. AC light & recirc light still light up and AC compressor clutch engages when turning fan on in AC mode, but not getting the fan to work. I replaced the blower motor resistor and the control unit with new parts from rockauto (ACDelco).

What causes a blower fan to turn faster?

The lower the resistance of the selected resistor in the pack, the higher the current that flows through the blower fan causing the fan to turn faster. The statements expressed above are only for informational purposes and should be independently verified.

What kind of blower does not work on high?

1997 GMC C1500 Heater/AC Blower Will Not Work on HIGH. 1997 GMC C1500 Heater/AC blower will not work on HIGH. I have replaced the black BOSCH relay behind the glovebox, the blower RESISTOR and the blower MOTOR and still cannot get the blower to work on HIGH.

Is there a high speed blower motor relay?

Yes there is a high speed relay which sounds like it is out. Here is a guide to help test it and the blower motor wiring diagrams so you can see how the system works with the relay location below as well. Check out the diagrams (Below).

How does a high speed blower motor work?

In the highest fan speed state, the blower resistor is bypassed completely and the fan is effectively connected directly to the car’s battery, allowing maximum current to be supplied to the blower motor.

Where can I get a new blower motor resistor?

I replaced the blower motor resistor and the control unit with new parts from rockauto (ACDelco). I’ve checked the fuse in the dash fuse panel and it is good.

Why does my blower motor resistor keep breaking?

If water spray enters the system, it can quench the hot resistor wires, causing them to break. If you notice the loss of one blower motor speed or all speeds soon after driving through rain, suspect water damage to the blower motor resistor. Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period.

How does the speed of a blower motor work?

This means that the current running through the blower motor, and its’ speed is therefore controlled by the resistor value. The user chooses a fan speed by selecting a speed which then connects one of the resistors in the blower resistor pack.

What is the function of blower motor?

What Does a Blower Motor Resistor Do? Definition. A blower motor resistor, typically located beneath the passenger side dashboard, contains three resistors, or sets of terminals designed to generate voltage in proportion to electrical current. Function. Blower motor resistors contain controls that determine air settings. Repair.

Is there a fuse for the blower motor?

The blower motor is powered by a fuse-like device called a relay. If your heater or air conditioner does not blow air through the vents, this could indicate that the blower motor fuse has probably blown. While replacement is easy, the exact location of your blower motor fuse may vary from vehicle to vehicle. Step 1

What does blower motor resistor do?

The blower motor resistor is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed. When fan speed is changed via the knob on the instrument cluster, the blower motor resistor changes setting, which changes the speed of the blower motor.

Why does blower motor resistor keep going out?

The blower motor appears to be defective here. When the brushes wear out the motor draws excessive amps which could cause the resistor to burn out. Before making further replacements remove the motor and check it, especially the brush assembly. This is the most likely reason for the resistor to fail repetitively.

Where is the resistor for the blower motor located?

Two individual resistors make up the blower motor resistor assembly on your Chevy pickup. As you’re probably already aware, these resistors are located between the A/C-Heater control panel and the blower motor . The purpose of these resistors is to reduce the amount of the blower motor’s current that’s passing through them.

Could You Tell Me the location of the blower motor resistor?

Find the blower resistor and detach it from the rest of the circuit. For the precise location, consult the repair manual for your car’s make and model. Some common locations are near the blower fan motor, under or behind the dashboard, around the passenger footwell etc.

How to test a blower motor resistor in the garage?

Look for obvious signs of corrosion and burns from overheating. If you want to do a quick test of the blower resistor, you can check the resistance of each of the resistors with a multimeter as follows: set the tool to read ohms (a measurement of resistance) and connect one of its probes to the common output terminal of the resistor.

Why does my Ricks free auto blower motor not work?

A clogged cabin air filter reduces airflow through the ducts, increases current draw on the blower motor and can cause blower motor resistor overheating and premature failure. If you replace the resistor and it burns out again, check the current draw on the blower motor.

What are the symptoms of a bad blower motor resistor?

Another common symptom of a faulty blower motor resistor is a a blower motor that does not function on certain settings. If the blower motor resistors’ internal components fail it may cause the blower motor to malfunction, or not function at all on one or more of the settings.

How can I tell if my blower speed switch is faulty?

Test for power at all the blower speeds by moving the blower speed switch through all positions. A faulty resistor loses power at different positions on the switch. High blower speed has direct power to the motor from the switch. If there is no power indicated on high blower speed, the problem is most likely the switch or the fuse.

If any of these resistances show an open circuit, then the blower resistor desires to get replaced. Know what fee you should pay to get your automobile constant. The average cost for a blower motor resistor substitute is between $80 and $150. Labour costs are envisioned among $35 and $80 even as elements are priced between $50 and $75.

How does a blower motor resistor control the fan speed?

The blower motor resistor controls the fan speed of the blower motor and the resulting change in air pressure produced by the movement of the blower fan. It accomplishes this by regulating the electric current that powers the motor.

How much does a blower motor resistor cost?

Depending on the manufacturer and model, a blower motor resistor can go anywhere between $3 and $335 on CarParts.com. The replacement parts come in individual units, sets of two resistors, or as part of a blower motor resistor kit.

Blower motor stuck on one speed. A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. Blower motor does not work on certain settings. No air from the vehicle’s vents.

Is there a way to test a blower motor?

Blower Motor Resistor Testing Place one lead of the Ohmmeter on terminal 1 of the resistor. Place the other lead on terminal 2 and check against specifications. Move the lead from terminal 2 to terminal 3 and check this reading against specifications. Move the lead from terminal 3 to terminal 4 and check this reading against specifications.

Is my blower motor bad?

No air from the vents. No air flow from the vents when the heater or air conditioning is activated is another symptom of a bad blower motor. If the heater blower motor burns out or short circuits, it will not function, and therefore will not be able to produce any airflow for the system. The blower motor will usually have to be replaced in order…

What should I do if my Bentley Blower Motor is not working?

You say you’ve checked the fuse and replaced the resistor. Wiring rarely breaks, so the next logical step is to access the fan motor per instructions in the Bentley service manual and use a multimeter to check for power at the fan motor connector when the switch is on.

Navigation