Why is the LCD on my Mercedes E class not working?
Several Mercedes models, including C Class and E Class from 1995 to 2003 have fading or completely dead pixels on the instrument cluster LCD display. This display normally shows the mileage, the temperature or the clock. The pixel problem lies with the ribbon cable that connects the LCD display to the circuit board of the instrument cluster.
What causes a Mercedes a class pixel failure?
Mercedes A class pixel failure: At this model the most typical failure is that the LCD dispay pixels are fading, missing, or the LCD is completely dead. This case you need to replace the fauty ribbon cable. This repair can be done DIY, however you will need a T head for soldering the new ribbon cable. NOTE: There are 3pcs in the package.
What’s the problem with the pixel on the instrument cluster?
The pixel problem lies with the ribbon cable that connects the LCD display to the circuit board of the instrument cluster. The pictures below show the instrument cluster’s LCD display before and after the ribbon cable replacement (just an example of several board computer / dashboard instrument cluster types): 1.
Why does my W202 C class keep blacking out?
W202 C Class is very similar fix as well. As the car ages your time or temperature display become distorted. Over time individual or lines of pixels don’t light up. Or maybe your LCD screens are completely blacked out. This is due to the LCD ribbon cables or burned out light bulbs. Watch this video where we repair a cluster.
Mercedes A class pixel failure: At this model the most typical failure is that the LCD dispay pixels are fading, missing, or the LCD is completely dead. This case you need to replace the fauty ribbon cable. This repair can be done DIY, however you will need a T head for soldering the new ribbon cable. NOTE: There are 3pcs in the package.
Several Mercedes models, including C Class and E Class from 1995 to 2003 have fading or completely dead pixels on the instrument cluster LCD display. This display normally shows the mileage, the temperature or the clock. The pixel problem lies with the ribbon cable that connects the LCD display to the circuit board of the instrument cluster.
The pixel problem lies with the ribbon cable that connects the LCD display to the circuit board of the instrument cluster. The pictures below show the instrument cluster’s LCD display before and after the ribbon cable replacement (just an example of several board computer / dashboard instrument cluster types): 1.
W202 C Class is very similar fix as well. As the car ages your time or temperature display become distorted. Over time individual or lines of pixels don’t light up. Or maybe your LCD screens are completely blacked out. This is due to the LCD ribbon cables or burned out light bulbs. Watch this video where we repair a cluster.
How many LCDs are in a Mercedes E class?
Mercedes E Class (2000+) Instrument cluster – assembled with 3 LCD on it: The instrument cluster on the picture below is a common Mercedes-Benz E Class (2000+) however was also used some cases at C Class models, too.
Why is the SRS warning staying on on a Mercedes Benz?
Why is the SRS warning staying on? Here is a list of some of the most common problems with the SRS system on a Mercedes Benz. Seat Occupancy Senor in the passenger seat. Low voltage in the electrical system. Battery issue or charging. Seat belt latch. Damaged Wire Contacts at the doors. Defective, damaged or loose contact at the impact sensors.
Which is better Mercedes E430 or e320?
I had a 1998 E430 and now have a 2001 E320. I really miss the 8 cylinders but I have a much better car in all other regards. In my experience, the gas mileage between the two is neglibible and a small price to pay for a lot more low end torque.
Are there any problems with the Mercedes transmission?
Including Engine, Transmission, ABS, Airbag, SRS, SBC Brakes, ESP, EPS, Air Suspension and more. In depth troubleshooting, but only works on MB cars. 2. Launch Creader X431 VII works in European, Asian and Domestic Cars.
What happens when a Mercedes Benz goes into limp mode?
When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level. The transmission has a dipstick tube but with no dipstick in it.