Why does my Passat keep blowing the fuse?
I need specifics as to why that wire is blowing the fuse. No fuses..no relays. Still blows fuse as soon as it gets one (as I stated earlier) puddle door lights removed, all lights removed (as I mentioned earlier), outside source of voltage same thing.
Where is the fuse box on a Volkswagen Passat?
Here you will find fuse box diagrams of Volkswagen Passat 2005, 2006, 2007, 2008, 2009 and 2010, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay. The fuse box is located on the left side edge of the instrument panel.
What to do if a fuse is blown on a Volkswagen Caddy?
Remove the fuse using the plastic tweezers located on the fuse box cover. Check if the fuse is blown – if the thin metal strip inside is broken, the fuse has blown. If the fuse is blown, replace the fuse with a new fuse of the same amperage (same color and same imprint) and the same overall size. Replace the cover.
When did the fifth generation Passat come out?
In this article, we consider the fifth-generation Volkswagen Passat (B6/3C), produced from 2005 to 2010. Here you will find fuse box diagrams of Volkswagen Passat 2005, 2006, 2007, 2008, 2009 and 2010, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
What to do when your plug harness breaks?
Push the pins back into your new plug with your fingers, or with pliers if that helps. Make sure you write down which color wires come out of each hole. The plug harness will be labeled with 1, 2, 3, and 4. These are some drawings that should help with understanding the pin connector and keeping the wires in proper order.
How do you remove a wire from a car harness?
To release the wire from the harness, you push or bend these tabs down slightly. These little tabs can be carefully opened back up with a penknife or small Swiss army knife before they are re-inserted into the new harness. Don’t bend them too much, as they are thin metal, and break easily like everything else VW/Audi makes.
How much does a wire harness plug cost?
That part will run about $12 at the dealership. These plugs can also be ordered online from ECS Tuning for about $18 and $9. Let’s MacGyver This B!! Yeah, welcome back to the ’80s. If you decided against the hundred-dollar tool, then it’s time to make your own out of a paper clip.
Where is the best place to replace a car fuse?
Regardless of which type of fuse your car uses, finding the best fuse and accessories for cars and trucks makes repairs and replacement easy. Replacing a blown fuse is simple. If your car features the most common type, a rectangular blade, it is contained in your car’s power distribution center.
Do you need a fuse tap to replace a fuse?
Replacing fuses often requires more than just the fuse itself, though. You need to right accessories for the job, too, and AutoZone has both. Fuse taps, for example, allow you to split power or install a new socket. Illuminating fuses make it easy to see the work you do and identify the correct part.
Which is the rarest type of car fuse?
Less commonly, you might find the clear glass fuse. This type of fuse contains its wire within a glass casing, and in the event of overload or shorting out, the wire breaks. Lastly, a continental fuse is the rarest of all and is usually only found in older vehicles. It features a metal strip on one side that melts if it is overloaded.