Why does my Nissan KA24E go out of time?
The KA24E came in 2.0- and 2.4-liter versions and was used in many Nissan autos, including: the 240SX, Pathfinder, Stanza and Nissan trucks. As engines run, they sometimes go out of time, causing a rough idle, loss of power and poor gas mileage.
What kind of car does the Nissan KA24DE engine make?
Cars That Use the KA24DE Engine Nissan set the KA24E and KA24DE in their various car production series. Some engines were destined for light duty pickup or trucks and SUV series such as the Nissan Hardbody or Nissan Xterra, but the nissan KA24 engine is best known for its appearance in the 240SX.
What kind of compression ratio does a Nissan KA24E have?
The compression ratio is 8.6:1 or 9.1:1 for early 1989 Nissan 240SX. The Nissan KA24E engine produced 143 PS (105 kW; 140 HP) at 5,600 rpm of horsepower and 206 Nm (21.0 kg·m; 152.0 ft·lb) at 4,400 rpm of torque. The Nissan KA24E motor has a cast-iron cylinder block, cast steel connecting rods, a half-counterweighted forged steel crankshaft.
What is the rev limiter on a Nissan KA24E?
The intake valve duration is 240°, valve lift is 10.4 mm (0.409 in); the exhaust valve duration is 248°, valve lift is 10.4 mm (0.409 in). The KA24E rev limiter is set on 6,500 rpm. The Nissan KA24E engine version for SUV uses a camshaft with duration 232°/232°, and valve lift 9.7/9.7 mm. For this engine, redline is lowered to 6,000 rpm.
How much horsepower does a Nissan KA24E have?
The compression ratio is 8.6:1 or 9.1:1 for early 1989 Nissan 240SX. The Nissan KA24E engine produced 143 PS (105 kW; 140 HP) at 5,600 rpm of horsepower and 206 Nm (21.0 kg·m; 152.0 ft·lb) at 4,400 rpm of torque.
What happens when the head gasket blows on a Nissan?
Well, because if the head were not warped and/or the head gasket not blown, then cranking the engine should have no effect whatsoever on the coolant inside the radiator. So, when you have coolant shooting out of an open radiator., this only happens when the head gasket has blown and/or the cylinder head has warped due to the engine overheating.
What kind of engine does a Nissan Hardbody have?
The Nissan hardbody pickup belongs to the D21 series of Nissan-made pickup trucks made between 1990-97. It refers to the pickup’s double-wall bed and styling. The engine used in this model was the KA20E 12-valve engine. The engine bore and stroke is 3.5 inches and 3.78 inches respectively.
The intake valve duration is 240°, valve lift is 10.4 mm (0.409 in); the exhaust valve duration is 248°, valve lift is 10.4 mm (0.409 in). The KA24E rev limiter is set on 6,500 rpm. The Nissan KA24E engine version for SUV uses a camshaft with duration 232°/232°, and valve lift 9.7/9.7 mm. For this engine, redline is lowered to 6,000 rpm.
The KA24E came in 2.0- and 2.4-liter versions and was used in many Nissan autos, including: the 240SX, Pathfinder, Stanza and Nissan trucks. As engines run, they sometimes go out of time, causing a rough idle, loss of power and poor gas mileage.
Where are the timing notches on a KA24E?
Rev the engine to 2,000 rpms twice, and then let it idle normally. Point the timing light at the arrow and timing notches located at the pulley. While the engine is running, pull the timing light trigger, and notice where the arrow aligns with the timing notches. Each notch is spaced at 5-degree intervals.