Why does my Ford Fusion make a noise when I turn the wheel?

Why does my Ford Fusion make a noise when I turn the wheel?

If you’ve noticed fluid on the side of one of your front shocks, chances are good that it’s blown and needs to be replaced. You may also notice that your car feels very loose and bouncy when going over bumps or through turns. Dry Jounce Bushing: The jounce bushing is located at the top of the front strut.

Why does my Honda Accord make a whining noise when I turn?

However, there are many different parts that are affected by physical stress during turns, and if you’re hearing a creaking noise when turning, or a whining sound, a groaning or any other unusual noise, it could be a sign of something serious.

Why does my car make a clicking noise when I turn the car?

Over time, since it’s just rubber, the boot becomes brittle and dry. Eventually it will split open and allow specks of dirt and debris to enter the joint. Once foreign matter mixes with the grease, the damage begins, and it is only a matter of time before the CV joint starts to make a clicking noise when turning.

Why does my car make a whining noise when in reverse?

When the car is is in reverse, the transmission pressure rises and the transmissions demand for fluid rises with it. A restricted filter will not allow the fluid to pass quickly enough. You can change the fluid and filter if this is the case or have it done for you but it might not be the end of your troubles.

Why does my Honda Civic make a rattling noise?

It is defect in design where the door windows rattle, especially when down for most people, but rarely when they are up. The dash rattles in cold weather; when it warms up, the rattling disappears. Honda warranty covers changing parts or trying to dampen the sound.

Over time, since it’s just rubber, the boot becomes brittle and dry. Eventually it will split open and allow specks of dirt and debris to enter the joint. Once foreign matter mixes with the grease, the damage begins, and it is only a matter of time before the CV joint starts to make a clicking noise when turning.

Why does my car make a scraping noise when I turn a corner?

If your vehicle makes a scraping noise that sounds like something being dragged across a tin plate while driving or when turning a corner, it’s possible you have picked up a rock from a dirt road or a freshly repaired pothole—the kind of place where you hear a shower of pebbles hitting the bottom of your car as you drive through.

Why does my CV joint make a clicking noise?

Eventually it will split open and allow specks of dirt and debris to enter the joint. Once foreign matter mixes with the grease, the damage begins, and it is only a matter of time before the CV joint starts to make a clicking noise when turning.