Why does my car stereo make clicking noise?
On year 2000 model and newer car stereo receivers, verify that the amplifier is connected to the AMP REMOTE lead on the car stereo, if available. If whine or clicking noise is heard . If you hear a whine or clicking noise that changes with the speed of the engine you may have a problem with the electrical system of the car.
What can I do to make my car radio not make noise?
Smear the area lightly with Vaseline or dielectric grease, and reattach. This will provide a proper ground at the antenna. Be sure the radio chassis is properly grounded to the car body. Aftermarket installations are more likely to have a radio that’s grounded only by the shield in the antenna co-ax.
What kind of noise does a car make?
Car won’t start fast clicking noise but radio lights and Car won’t turn on all I hear is a fast clicking noise power windows work radio turns on all light inside vehicle work please help. My car has 61577 miles.
Why is there no sound in my car?
There is noise, cracking sound, static or no audio through the speakers of the car stereo system. Noise in your car audio system can be caused by more than one issue. Noise can be static, whine, hiss, distortion, or other sound issues.
On year 2000 model and newer car stereo receivers, verify that the amplifier is connected to the AMP REMOTE lead on the car stereo, if available. If whine or clicking noise is heard . If you hear a whine or clicking noise that changes with the speed of the engine you may have a problem with the electrical system of the car.
Car won’t start fast clicking noise but radio lights and Car won’t turn on all I hear is a fast clicking noise power windows work radio turns on all light inside vehicle work please help. My car has 61577 miles.
There is noise, cracking sound, static or no audio through the speakers of the car stereo system. Noise in your car audio system can be caused by more than one issue. Noise can be static, whine, hiss, distortion, or other sound issues.
What should I do if I hear a noise in my car?
Turn on your system and engine. If the noise is gone, reconnect the cables to the amp, and disconnect them from your receiver. If you hear the noise, your patch cables are definitely picking it up. Try re-routing them. Separate them from your power cable by at least 18 inches. You could try a better brand of patch cables.
What to do when there is no sound in your car?
If you have extended the ground wire, make sure the splice is firmly connected and you may need to use a larger gauge (thicker) ground wire. Turn on your audio system without the car running. Put in a CD and set the CD player on pause, or insert a blank tape if you have a cassette deck. Turn up the volume to a normal listing level.
What should I do if I hear a hissing sound in my car?
Turn on your audio system without the car running. Put in a CD and set the CD player on pause, or insert a blank tape if you have a cassette deck. Turn up the volume to a normal listing level. If you hear a hissing sound, turn down the gain on the amplifier and turn up the volume on the receiver. Adjust these two settings to minimize the hiss.
What should I do if I hear a hissing sound from my amplifier?
If you hear a hissing sound, turn down the gain on the amplifier and turn up the volume on the receiver. Adjust these two settings to minimize the hiss. Make sure the patch cables between the amplifier and the receiver are not running near other power wires (including the wire providing power to the amplifier).
Why does my Yamaha RX v675 have no sound?
I connected just the basics, two speakers (all I have right now), subwoofer (powered), hdmi out and network to try it out, and I’m not getting any sound out of it whatsoever. I’ve tried using the radio, and playing Pandora through the internal app and no matter how much I turn the volume up, I get absolutely zero sound.
Turn on your audio system without the car running. Put in a CD and set the CD player on pause, or insert a blank tape if you have a cassette deck. Turn up the volume to a normal listing level. If you hear a hissing sound, turn down the gain on the amplifier and turn up the volume on the receiver. Adjust these two settings to minimize the hiss.
Is the Yamaha rx-v675 an AV receiver?
I’ve recently acquired a Yamaha RX-V675 AV Receiver. I connected just the basics, two speakers (all I have right now), subwoofer (powered), hdmi out and network to try it out, and I’m not getting any sound out of it whatsoever.
If you have extended the ground wire, make sure the splice is firmly connected and you may need to use a larger gauge (thicker) ground wire. Turn on your audio system without the car running. Put in a CD and set the CD player on pause, or insert a blank tape if you have a cassette deck. Turn up the volume to a normal listing level.
What to do if your Mercedes Benz Radio is not working?
For you to do that, you will need to remove the fuses for the CD Changer, COMAND/ NAV / DVD Player / Radio, Audio Gateway AGW, and the Voice Unit if it is equipped with one, for at least 10 minutes. Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order.
Why does my Mercedes Benz have no sound?
Troubleshooting the fiber-optic loop is the next step that you should do if removing the fuses does not solve the no-sound problem. The fiber optic cables are used to transmit the sound signal of your Mercedes-Benz between the different units for better sound quality and faster transfer rates.
What to do if Mercedes Benz audio gateway is defective?
You need to figure out which component is defective by bypassing each component until you find the problem. The Audio Gateway is the brains of the Mercedes-Benz COMAND system. You will need to have an authorized Mercedes-Benz service technician replace the whole unit if AGW is defective. This entry was posted in Info Articles.
What causes a Mercedes Benz to have no sound?
Some common problems with the Mercedes-Benz COMAND system include issues such as: 1 Head Unit / Radio stuck on Mercedes-Benz logo 2 Turns on and then off 3 Shuts off randomly 4 COMMAND will freeze 5 Radio powers on but there is no sound 6 Audio Gateway (AGW) drains the car battery 7 Radio panel doesn’t turn on. (Hint: Check fuses.) More
Why is the radio not working on my Mercedes Benz?
Is the radio on your Mercedes-Benz not working? Some common problems with the Mercedes-Benz COMAND system include issues such as: Radio panel doesn’t turn on. (Hint: Check fuses.) The fist thing you should try is to do a soft reset of the COMAND unit.
How to reset audio / radio / CD changer on Mercedes Benz W211?
Here are the instruction on how to reset the audio/radio/command/cd changer system on a E-Class W211. If you have different Mercedes-Benz model, you will have different fuse numbers assigned to your command, radio, CD changer and audio gateway.
Is there a way to get no sound from speakers?
Before you do anything, go into the W209 archives to see what others have done about this problem. Use the Search facility at the top of your page, and use the key words ‘sound amplifier’. Here is one that could be of interest to you. I have no sound also and my radio is constantly displaying aquiring signal.
Why does my car make a rattling noise when I turn?
Loose hubcaps: When the lug nuts on your hubcaps become loose, the hubcaps will have wiggle room, and will shake when you drive your car at high speeds, or when you make turns. This shaking creates a rattling noise that you’ll usually hear from inside the cabin of your vehicle.
What kind of noise is coming from my speakers?
Noise can be static, whine, hiss, distortion, or other sound issues. Make sure to check ground wires . Check the ground wires to all of the components in your system. This may include the receiver (head unit), external amplifier, equalizers, or other components.
Why is there a noise coming from my Radio?
Noise is heard only when listening to the radio . If the noise is only heard when listening to the radio, it may be coming through the antenna. Remove the antenna wire from the receiver. If the noise goes away you may need to install an antenna noise suppressor that plugs in between your antenna and the receiver.