Why do you need a relay for a headlight switch?
By using a relay we move the high current switching away from the headlight switch so that the switch only sees a small current – in the range of a few thousands of an amp. This solves part of the problem. You will need two relays – one for low beam and one for high beam.
Why are my low beam headlights not working?
Rating does not close the post and you’re more than welcome to follow up. I changed the relay low beam lights still do not work! Check if you have voltage at both of the low beam fuses with the headlights on low beam. that would be #12 and #16 in the underhood fuse block.
Where does the fuse go on a headlight relay?
The two headlamps are connected together, as normal, and taken to Pin 87 of the relay. Pin 85 goes to ground while Pin 30 goes to the new 30A fuse. If you wish to, a separate wire from the fuse can be used for each relay and can be colour- coded the same as the corresponding headlamp wire. This is what I did.
How many amps do you need for a headlight relay?
If you wish to do so, you can install 15 Amp fuses in each lamp beam circuit. These fuses should be placed adjacent to the new 30 Amp fuse. Make sure the connections are clean, tight and covered with white grease. So, now you know what the problem is and how you can fix it. OK, if you really insist, more “While you are at its”.
How to wire a headlight enhancement relay kit?
This video is a detailed walkthrough of the American Autowire headlight enhancement relay kit. Our kit includes separate relays for the high and low beams as well as upgraded GXL wire to make fresh connections to your lights. It’s available in both standard (pn/ 500403) and weatherproof (p/n 500431) form. Loading…
Is there a fuse for the high beam headlamp?
No fuse aside from the BCM mega fuse, which would affect more than just one headlamp, fuse 74 is the high beam, but for both sides, The power to the headlamps is controlled by the BCM. Sounds like either the bulbs or the wiring to the right lamp. The BCM does split the circuits to either headlamp, so it is possible there’s a fault there as well.
What can cause a low beam headlight to be dim?
If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks! What can cause the light to be dim except when on the high beam setting?
What to do if your headlight fuse is not working?
First, locate the headlight fuse and make sure it is intact. If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks!