Why did my drive belt break on my Harley Davidson?
You can’t be to hard on your bike for the belt to last that long. Maybe you picked up a piece of gravel causing belt to break. 83,000 km is only 50,000 miles. Thats not actually very much distance on a belt but if the belt was original and therefore from ’96 it was definitely getting very old and probably dried out and cracked.
When to change the drive belt on a motorcycle?
Because the drive belt on that bike was also original equipment and had reached 12 years of age and 26,145 miles, I decided to have the drive belt changed at the same time and keep that old belt to see what tales it might tell. Frankly, I didn’t expect to see anything notable at all.
How long does a Harley Davidson drive belt last?
Discussion in ‘ Softail Models ‘ started by brt650, Dec 3, 2010 . How long does a drive belt last I wondered? I found out how to bring that question to an answer. 1996 FLSTC 83,000 km’s. Original belt. One idiot owner that decided to race the little black dog at the end of the gravel driveway. I saw this day coming.
Can a bike drive belt be misaligned?
Since the ’99 Harley has had several rear tire changes over the life of the belt, where the belt was not changed, misalignment could have happened at any of them. So exactly where some degree of misalignment may have happened we’ll never know.
When did the drive belt on my bike fail?
A while back, the final drive belt on my 1999 Harley-Davidson XLH 883 Sportster failed in my garage. If a bike’s drive belt is going to break, that’s the place to have it happen. We had a look at that breakage event back in May 2018.
How do you adjust the drive belt on a Harley?
Try adjusting the belt after it is at operating temp (like ride it a while), then adjust belt to the loose side of the spec, like 7/16″. The pulley’s expand, the belt doesn’t. I also use 2 x 8′ flouresent blubs on each side of the rear tire (be careful not to break them), and see if the rear wheel is inline with the front wheel.
Discussion in ‘ Softail Models ‘ started by brt650, Dec 3, 2010 . How long does a drive belt last I wondered? I found out how to bring that question to an answer. 1996 FLSTC 83,000 km’s. Original belt. One idiot owner that decided to race the little black dog at the end of the gravel driveway. I saw this day coming.
Because the drive belt on that bike was also original equipment and had reached 12 years of age and 26,145 miles, I decided to have the drive belt changed at the same time and keep that old belt to see what tales it might tell. Frankly, I didn’t expect to see anything notable at all.
How many miles does it take to break a drive belt?
83,000 km is only 50,000 miles. Thats not actually very much distance on a belt but if the belt was original and therefore from ’96 it was definitely getting very old and probably dried out and cracked. Better to have it break at the mercy of some dog than while some cage was breathing down your neck out on the highway somewhere.
Can a drive belt be replaced on a Harley?
The drive belt on a Harley Softail is connected to the rear wheel and the transmission. If the drive belt is damaged or broken, the bike will not run properly. Replacing the drive belt yourself can save considerable time and money. With the correct tools and knowledge, almost any Harley owner can replace the drive belt in around two hours.
Can a drive belt be broken on a Softail?
The drive belt on a Harley Softail is connected to the rear wheel and the transmission. If the drive belt is damaged or broken, the bike will not run properly. Replacing the drive belt yourself can save considerable time and money.
How do you replace a Softail on a Harley Davidson?
You can buy the tools and replacement belt at any Harley dealership. Raise the Softail off the ground using the motorcycle stand. Remove the rear axle nut using the pliers. Tap the axle rod out using the push rod and hammer. Push the Softail’s rear wheel forward and remove the drive belt from the sprocket.
What kind of belt drive does a Dyna have?
We had a Dyna, Touring and Softail on hand to show you the slight differences. It doesn’t really matter the year and make of your Harley as this process is pretty standard. We can say that this video covers 2000 and newer Harley’s and likely earlier models.
What happens when your drive belt wears out?
For example, if the protective shield underneath the engine (engine undercover) is broken, the belt will wear out sooner. Oil leaks can also damage the drive belt. Eventually, a worn drive belt will break. Broken drive belt. If a drive belt breaks, you won’t be able to drive your car.
What are the symptoms of a bad drive belt tensioner?
Another symptom of a potential problem with the drive belt tensioner is unusual belt wear. If the drive belt tensioner pulley has any sort of issue it can cause unusual and accelerated wear on the belt. A bad pulley can cause fraying on the edges of the belt, and in severe cases can even cause it to break. 3. Belt-driven accessories fail
How much does it cost to replace a drive belt?
One of the symptoms of a loose drive belt is a loud squealing or screeching noise that lasts for a few seconds after the engine is started. Often, drive belts are replaced as a kit with the new tensioner and other hardware. Replacing the serpentine belt may cost from $75 to $250, depending on the car.
What are the common problems with belt systems?
While belts require very little maintenance, improper belt tension, misalignment of pulleys, mishandling of belts, and environmental factors are common problems that can shorten the life of your belts and bring your system to a halt. Improper Tension.