Where is the airbag light on a 1999 Jeep Grand Cherokee?

The airbag light illuminates on the instrument panel of your 1999 Jeep Grand Cherokee when there is a problem with the airbag system. Any problem with that system should be addressed immediately to prevent the airbag from malfunctioning. Once the problem has been fixed, the light may or may not still be on.

Why does the airbag light stay on in a jeep?

If all parts of this system are not working properly, it can cause the airbag light to come on. If you’ve been in an accident, the airbag light is going to stay on until the system has been restored. It will not work until repaired. Here are some common reasons that your Grand Cherokee’s airbag light could come on. 1. Seat Belts

How does the code scanner work on a Jeep Cherokee?

Plug the code scanner into the port. The Cherokee’s battery will power the scanner on. Use the arrow keys on the scanner to locate the reset light function. Select this function and the airbag light will turn off. Remove the scanner from the port and turn the vehicle off. Turn the engine on.

Where is the airbag switch on a car?

It may be on the dashboard itself, in the glovebox or on the side of the dash so that you need to open the passenger door to access the switch. The switch will have two positions ‘on’ and ‘off’. To move the switch from one position to another you need a special key that you insert into the switch and turn.

How to disable an airbag on a Jeep Grand Cherokee?

Disabling the airbag on a Jeep Grand Cherokee takes just a few minutes. The airbag that is attached to the steering wheel cover connects to the fuse box with a couple of electrical wires running through the steering wheel. You can access these wires from underneath the steering wheel when you remove the steering wheel column cover.

Where are airbag codes stored in a jeep?

Below you will find common airbag codes that can be stored in your airbag control module after your vehicle was in an accident. The best part of having your Jeep’s original airbag module reset by MyAirbags is that when you get your airbag control module back and it goes back into the same vehicle that it came out of then it will be plug-n-play.

Is the Jeep airbag module reset by myairbags?

The best part of having your Jeep’s original airbag module reset by MyAirbags is that when you get your airbag control module back and it goes back into the same vehicle that it came out of then it will be plug-n-play. No additional programming of the VIN is required.

Where is the fuse on a Jeep Grand Cherokee airbag?

Find the airbag fuse by looking at the diagram on the fuse box lid to see which fuse operates the airbag. Remove the airbag fuse with a fuse puller and find the plastic steering column cover underneath the steering column. Unfasten the screws holding the steering column cover on with a screwdriver and set the cover out of the way.

What does the diagnostic warning light on the Jeep Grand Cherokee mean?

Every time you start your Jeep Grand Cherokee, the computer system runs a self diagnostic check on all major systems. If any of these checks fail, you will see a diagnostic warning light on the dash for the corresponding system. When the airbag system fails this check, you’ll see the airbag light.

Where is the reset light on a Jeep Cherokee?

Put the key into the ignition and turn it to the “On” position. Do not start the engine. Look for a port under the steering column that is the same shape as the plug on your code scanner. Plug the code scanner into the port. The Cherokee’s battery will power the scanner on. Use the arrow keys on the scanner to locate the reset light function.

Why is my Jeep stock radio not working?

Especially vehicle pcbs as they have to be “rugged”. The power caps and ICs are the likely culprits. Check the solder points underneath the pcb too (most pcbs of that era are through-hole). Look for the solder to be cracked away from the via.

Is it worth it to repair a jeep radio?

In the 21st century, repair men and ladies are gone to the way side, the labor prices make these small jobs not worth the effort, everybody is just replacing their units with new, used, aftermarket or trying simple repairs themselves as mentioned here, good luck.

Why is my Jeep Wrangler air conditioner not working?

A slipping belt and issues with refrigerant levels are quite common with Jeep wrangler AC systems. Because the compressor runs using a belt or pulley system, it is prone to malfunction due to belt related failures. Here is a step by step to help you troubleshoot your Jeep AC. Fist, open the hood to inspect the inside of your jeep .

Can a Jeep Grand Cherokee have an air conditioner?

It is entirely possible for your Grand Cherokee’s heater to work just fine even when the air conditioner is not blowing cold at all. That’s why troubleshooting the air conditioner is totally different than troubleshooting the heater.

What causes a Jeep Wrangler to stop running?

An accessory belt turns a pulley that is connected to a compressor to deliver the refrigerant to the cabin. When this system malfunctions, there are normally only two possible problems–the system is out of refrigerant, or the belt is slipping on the pulley. Before you replace anything, troubleshoot the problem.

Why is my Jeep Grand Cherokee not blowing cold air?

One of the most inconvenient vehicular problems is when the A/C won’t blow cold air. If your Jeep Grand Cherokee isn’t keeping you cool, we’ve outlined some of the most common reasons why this might be happening.

What should I do if my airbag light is still on?

Any problem with that system should be addressed immediately to prevent the airbag from malfunctioning. Once the problem has been fixed, the light may or may not still be on. If it’s still on, you definitely want to reset it at once.

Are there any problems with the Jeep Cherokee air bag?

Jeep Cherokee owners have reported 42 problems related to air bag light on (under the air bag category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jeep Cherokee based on all problems reported for the Cherokee.

Why does my air bag light not go off?

See all problems of the 1998 Jeep Cherokee . The air bag light comes on an d will not go off. The light say service air bag. Have taken it to a dealership to check the issue. They thought pinched wire and they repaired it; however after 2 days the light returned.

When does the air bag light come on?

First my air bag light came on and said service air bag system. Next the seat belt light is on and dings when someone is in the passenger seat even the the seat belt buckled. Now my tpms light is on without any issues with the air in the tires. This is an ongoing issue they cant resolve. See all problems of the 2017 Jeep Cherokee .

Why are all the lights on my Jeep Cherokee not working?

The lights work (cel, seatbelt light, air bag, etc) but the actual gauges don’t work. Any ideas of where I should check? All the grounds seem to be connected, and I haven’t made any changes with wiring in regard to the cluster.

Why is the instrument cluster on my Jeep Cherokee not working?

The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698. All of them have to do with the PCM not communicating with the instrument cluster.

What kind of gauges should I use on my 1999 XJ?

Lol I’m thinking may just go with all aftermarket gauges , speedo and tach…..trace out the indicator lights and do it custom….any thoughts on gauges? I have a 1999 XJ – and the instrument cluster occassionaly stops working — with mine, if you push on it towards the bottom (nearest the odo reset) it will reseat and continue working for months.

Checked the fuses, as well as the hot to the cluster from the fuse and back to the battery. Next plan is the grounds and then the connectors. Not liking this instrument panel

Why is the air bag light on on my 1998 Jeep Cherokee?

Air bag light is on, we find a recall that is open and active. Bright vehicle to yaklin for repair and they declined the repair because the part has been discontinued. See all problems of the 1998 Jeep Cherokee .

Where can I get a Jeep Cherokee air bag repaired?

The vehicle was taken to hibbing Dodge Chrysler (1321 e 39th st, hibbing, mn 55746, (218) 263-7700) to be diagnosed, but the test found no failure. The dealer repaired the vehicle four times, but the failures continued. The manufacturer was not made aware of the failures. The failure mileage was 26,000.

Why does the airbag light come on on a Jeep Grand Cherokee?

Your airbag light is part of your Grand Cherokee’s larger supplemental restraint system. It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on.

How do you install an airbag light on a Jeep Wrangler?

Position the heat shrink tubing over the solder joints and shrink the tubing using a heat gun. Install the connector to the bracket. Install the instrument cluster. Connect the battery cable. Verify correct operation of the cluster. Reimbursable within the provisions of the warranty.

What does intermittent air bag warning light mean?

SUBJECT: Erratic, Intermittent Cluster Operation/Intermittent Air Bag Warning light. This bulletin involves installing a repair harness containing a revised instrument cluster connector. Some vehicles may exhibit an intermittent illumination of the air bag warning light or an intermittent tachometer or speedometer drop out.

What does the Dashboard Light on a jeep mean?

This dashboard light blinks on your Jeep Grand Cherokee dashboard to indicate that you may not firmly close the door of your Cherokee. So make sure to shut all the doors adequately. This dashboard light illuminates your Jeep Grand Cherokee Instrumental cluster to notify the engine coolant temperature dropping in your Cherokee.

What to do if your Jeep has no climate control?

Then remove the hvac unit and control knobs. Careful with the knobs, they are keyed and will only remove when turned to a certain position. You can carefully pull while turning them and they should pop out when you find the slot. Using a flat screwdriver unclip the clamshell plastic housing and then remove the control board.

What makes a Jeep Grand Cherokee air conditioner work?

The only thing that the air conditioning system has in common with the heater is that they both use the climate controls and the blower motor. It is entirely possible for your Grand Cherokee’s heater to work just fine even when the air conditioner is not blowing cold at all.

When to reset the Immobilizer on a Jeep Grand Cherokee?

The system is activated when something other than an authorized key is used to try to start the engine. Most models are also equipped with an alarm system as part of the security system. If something triggers the immobilizer or the alarm system, you need to reset and rearm the system.

Why does the a / C quit blowing on my 1999 Jeep Grand Cherokee?

The A/C (and heater) quit blowing on my Dad’s 1999 Jeep Grand Cherokee a while back so I took a look at it. The fresh air/recirculate blend air door seems to have broken up in the air duct causing it to suck up against the blower intake and stop all the air flow.

Is the Jeep Grand Cherokee running out of gas?

I have a 99 Jeep Grand Cherokee with about 183,000 miles. Over the last couple of days it has developed a problem where when accelerating it will lose all engine power for about 5 seconds (rpms drop and and then regain power with a short burst of acceleration). It feels like it’s running out of gas.

Why does my Jeep Grand Cherokee have no air flow?

The fresh air/recirculate blend air door seems to have broken up in the air duct causing it to suck up against the blower intake and stop all the air flow.

How do I Reset my Jeep Grand Cherokee?

Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed. “2011 Jeep Grand Cherokee Owner’s Manual”; Chrysler Group LLC; 2010

When do you see the airbag light on?

When the airbag system fails this check, you’ll see the airbag light. Depending on the model year and what country you happen to be in, you may get something along the lines of SRS, a picture of a person with the airbag deployed, or the word airbag. All of these should be treated as the airbag light.

Do you clear trouble codes before resetting airbag light?

Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.

Navigation