Where are the trouble codes on a Hyundai?

Hyundai Specific Trouble Codes OBD-11 code Fault location P1112 Intake air temperature (IAT) sensor- cir P1114 Engine coolant temperature (ECT) sensor P1115 Engine coolant temperature (ECT) sensor P1118 Throttle motor – malfunction

What is the problem code for the Hyundai ix35?

Hyundai Ix35 Engine lights on- Problem Code P0638 Unable to accelerate when engine starts. However if I start engine (insert and turn key with no hold/pause, to start engine it will work perfectly, car can accelerate. Can someone help me with this p…

What is the code for Hyundai OBD-II rough idle?

Note: See this page for generic OBD-II codes (they start with P0***). Hyundai P0343 P2122 Rough idle and won’t rev past 3000 rpm. Engine won’t rev past 3000 rpm. Cam circ high, code P0343 and Accelerator position circ low, code P2122.

What are the symptoms of Hyundai Tucson p0014?

Typically, P0014 will cause quite a few noticeable symptoms in the Hyundai Tucson. They include (but are not limited to): Difficulty Starting – Like any vehicle with ignition timing that is too far advanced, it can be really difficult to start a vehicle with P0014, particularly when the engine is at normal operating temperature.

What causes the POS sensor on a Hyundai to change?

The change in the magnetic field cause the voltage from the sensor to change. When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals. Need more information on how to fix the P0365 HYUNDAI code?

What causes an error code on the transmission temperature sensor?

– Poor transmission fluid temperature sensor circuit connection – Faulty transmission fluid temperature sensor The Error code is generally activated on detection of the following conditions: The Engine Control Module (ECM) detected engine temperature change but recorded no transmission temp change

What is the trouble code for Hyundai Tucson?

P0014 is a relatively common trouble code for vehicles that have Variable Valve Timing (VVT). This includes the Hyundai Tucson.

Where do I find the fault code on my Hyundai?

Connect your OBD-II scanner into the OBD-2 port under the dashboard on the driver’s side. Note: Even a $20 generic OBD-2 scanner can retrieve check engine / ECU Hyundai fault codes. Those are P-codes in the Hyundai list below.

What does p0014 mean on a Hyundai Tucson?

This includes the Hyundai Tucson. VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor. P0014 means that the camshaft position is too far advanced from where it should be in relation to normal operating specs. Below, you’ll find some typical issues that cause P0014.

What is the code for Hyundai Santa Fe 3.3?

I’m the original owner of a 2009 Hyundai Santa Fe, 3.3. The auto has 139,000. This automobile has been the best car I’ve ever owned. The only thing I’ve done is ch… I have a Kia K2900 single cab chassis the error code P0266 appears, and when the engine is running there is a lot of spray/mist coming out of cylinder 2?…

How does the p0320 code work on a Hyundai?

The P0320 code is triggered when the Engine Control Module (ECM) detects that there is no current at the ignition coil group P0320 HYUNDAI Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) Lack/Loss of Power The engine may be harder to start The engine may stumble or stall P0320 Hyundai Description

What does c1201 engine control system malfunction mean?

The C1201 code means that there is problem with the engine. You should try fixing the P0456 code first, clear all the codes and check again. Do you have any other symptoms? Read more: https://www.autocodes.com/p… Hi, I have Toyota auris 2009..there is only one code c1201. What does this mean?

What does fault code p0172 and p0175 mean?

P0172/P0175 Diagnostic Theory for Shops and Technicians. When a vehicle has the fault code P0172 and or P0175, it means that computer can no longer automatically adjust the mixture between air and fuel. Code P0172 applies to Bank 1 and P0175 applies to Bank 2.

What is the fault code for the Hyundai Elantra?

Hyundai Sonata, Excel 90 on , Scoupe 91 & 92 , Elantra. Hyundai Scoupe 93 through 95 and Accent vehicles. 4155 ECM failure A/C relay, IAC, PC.” You will need a Hyundai multi-system OBD-2 scanner to read Hyundai specific fault codes.

What kind of engine codes does a Hyundai have?

This list contains more than the Hyundai Check Engine Codes. Here you will find Hyundai ABS, Airbag, and Transmission DTC codes. P0244 Turbocharger/Supercharger Wastegate Sol. ‘A’ Range/Performance P0245 Turbocharger/Supercharger Wastegate Sol. ‘A’ Low P0246 Turbocharger/Supercharger Wastegate Sol. ‘A’ High

What is the DTC code for a Hyundai?

In this article, you will find a complete list of Hyundai Trouble Codes. This list contains more than the Hyundai Check Engine Codes. Here you will find Hyundai ABS, Airbag, and Transmission DTC codes. P0244 Turbocharger/Supercharger Wastegate Sol.

Where can I get an OBD code for my Hyundai?

Full list of OBD II Diagnostic Trouble Codes for your Hyundai. If your Check engine light is on you may have a serious problem. Scan your codes and follow the chart to determine what the code means. Some shops will scan your codes for free. Autozone is one place that will give you the code number.

Where is diagnostic connector on Hyundai multi use tester?

Connect harness connector of multi-use tester to diagnostic connector in fuse box, located on left kick panel. Connect power-source terminal of multi-use tester to cigarette lighter socket. Turn ignition switch On, then use multi-use tester to read self-diagnostic codes.

When did the Hyundai Elantra XD come out?

Factory workshop manual / factory service manual for the Hyundai Elantra series vehicles with chassis code XD, built between 2001 and 2006.

Are there any problems with the Hyundai Elantra?

Many Elantra owners complain about engine problems, steering issues, service brake troubles, and electrical system mishaps. If you’ve encountered any of these problems with your vehicle, you’re not alone. If you drive an older Elantra model, you’re probably no stranger to its transmission and suspension system issues.

What kind of engine does a 2004 Hyundai Elantra have?

The GTs feature leather seating surfaces and a new Kenwood CD/MP3 audio system. A 2.0-liter dual-overhead-cam four-cylinder engine that gains continuously variable valve timing for 2004 powers both Elantra models.

What does the Hyundai p0501 speed sensor code mean?

What does this mean? Basically this means that the vehicle’s speed as read by the Vehicle Speed Sensor (VSS) is not working properly. This code is different from the P0500 Hyundai code in the fact that it may not trigger the malfunction indicator light (MIL).

What does a p0501 trouble code mean?

Although generic, the specific repair steps may vary depending on make/model. What does that mean? Basically a P0501 trouble code means that the vehicle’s speed as read by the Vehicle Speed Sensor (VSS) is outside of the expected range (too high or low for example).

How much does it cost to repair a Hyundai p0501?

The cost of diagnosing the P0501 HYUNDAI code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Where can I find the OBD code for a Hyundai?

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Hyundai makes. 2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

What are the computer codes for Hyundai Sonata?

COMPUTER CODES for Hyundai Vehicles. CODE Hyundai Sonata, Excel (90 on), Scoupe (9 1 Electronic Control Unit (ECU) (one long 2 ECU system normal 11 Oxygen sensor or circuit 12 Airflow sensor or circuit

Navigation