Where are the lug nuts on a Mercedes?
The five lug nuts are located around the Mercedes star logo in the center of the rim. Do not remove the lug, only loosen them about one turn. Place the jack under the car and raise the Mercedes until the tire is about 1 1/2 inches off the ground. If you look under the car you will see a flat area where your jack will fit.
What’s the best way to remove a lug nut?
Loosen the lug nuts, rotating the lug wrench counterclockwise, and then remove them by hand. Save the top lug nut for last. Remove the remaining lug nut, and screw an alignment bolt into its slot. Place your hands firmly under two sides of the wheel and pull it toward you. Roll the wheel to a safe area, and set it down on its side. Figure 5.
Where are the lug nuts on a flat tire?
Loosen the lug nuts on the flat tire with the lug wrench. The five lug nuts are located around the Mercedes star logo in the center of the rim. Do not remove the lug, only loosen them about one turn. Place the jack under the car and raise the Mercedes until the tire is about 1 1/2 inches off the ground.
Where can I get wheel locks and lug nuts?
Wheel Installation Kit by McGard®. The convenient way to order wheel locks, lug nuts and valve stems. Kit contains all the hardware that you need to install 4 wheels and tires. McGard wheel locks and lug nuts are manufactured in the USA… Wheel Locks Set by McGard®. Protecting the world’s finest wheels and tires from theft since 1964.
Loosen the lug nuts, rotating the lug wrench counterclockwise, and then remove them by hand. Save the top lug nut for last. Remove the remaining lug nut, and screw an alignment bolt into its slot. Place your hands firmly under two sides of the wheel and pull it toward you. Roll the wheel to a safe area, and set it down on its side. Figure 5.
Can a lug nut be bent on a Mercedes Benz?
The lug nut wrench that Mercedes installs on these cars is inadequate to loosen these lug nuts and in can bend easily. Here is a lug nut wrench that got bent when we were trying to change a Mercedes-Benz tire. To avoid this problem, consider using an aftermarket lug nut wrench that will not break and is extendable.
How do you tighten a lug nut on an Acura?
Tighten the wheel bolts or lug nuts to the specified tightening toque in a crosswise sequence using a calibrated torque wrench. Check all wheel bolts or lug nuts in the same sequence and retighten to the prescribed tightening torque if necessary. Under no circumstances use pneumatic or electric screwdrivers to screw in and tighten the wheel bolts.
What happens when you change a tire on a Mercedes Benz?
Over time the lug nuts may corrode or simply refuse to come off. The lug nut wrench that Mercedes installs on these cars is inadequate to loosen these lug nuts and in can bend easily. Here is a lug nut wrench that got bent when we were trying to change a Mercedes-Benz tire.