Where are the low beams on a 2011 Hyundai Santa Fe limited?

Where are the low beams on a 2011 Hyundai Santa Fe limited?

I found out that there is actually a headlight relay under the driver’s side dash that, when it is bad, will cause there to be three highs at the headlights. You can find it between the side of the car and where the hood latch is located. I have the identical problem on my son’s 2011 Hyundai Santa Fe Limited. Low beams suddenly stopped working.

Why are my Santa Fe headlights not working?

This eyebrow effect is not showing when the high beams are on. In addition when the low beams are in use, the myvision on both sides of the car is blocked out. This seems to be a common complaint which Hyundai will not address claming there is no fix since the lights are performing as designed.

What causes loss of view in Hyundai Santa Fe?

Also please check out the statistics and reliability analysis of Hyundai Santa Fe based on all problems reported for the Santa Fe. Dark spot in low beam headlight field causes loss of view for driver as the dark spot passes from object to object.

Why are my Hyundai Accent low beams not working?

My 2005 Hyundai Accent low beams are not working. The high beams only work if I pull the turn signal light multi-switch back but the high beams do not work if I put them in full-time high beam. I checked the voltage at the headlight bulb when on low beam and all 3 connections read high, just like the original poster.

I found out that there is actually a headlight relay under the driver’s side dash that, when it is bad, will cause there to be three highs at the headlights. You can find it between the side of the car and where the hood latch is located. I have the identical problem on my son’s 2011 Hyundai Santa Fe Limited. Low beams suddenly stopped working.

This eyebrow effect is not showing when the high beams are on. In addition when the low beams are in use, the myvision on both sides of the car is blocked out. This seems to be a common complaint which Hyundai will not address claming there is no fix since the lights are performing as designed.

Also please check out the statistics and reliability analysis of Hyundai Santa Fe based on all problems reported for the Santa Fe. Dark spot in low beam headlight field causes loss of view for driver as the dark spot passes from object to object.

My 2005 Hyundai Accent low beams are not working. The high beams only work if I pull the turn signal light multi-switch back but the high beams do not work if I put them in full-time high beam. I checked the voltage at the headlight bulb when on low beam and all 3 connections read high, just like the original poster.

Is there a problem with my low beams?

I have a Gen 4. I have checked all of my fuses just to make sure they were all good. My low beams do not work at all. However, my high beams work fine. If i have the low beams turned on, there is nothing. When i turn on the high beams, they work fine. Heres the wierd part though.

Is it possible to fix a bad low beam headlight?

Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.

What to do if your high beams don’t work?

High beams work fine either on full time or by pulling the switch to pass/momentary position. Checked all relays & fuses, everything checks good, bulbs are good. The electrical connector into the headlight housing has 6 wires.

Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.

When to Change headlight bulbs on Hyundai Santa Fe?

Headlights grow dimmer by up to 20% over time and eventually burn out – for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your Santa Fe at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side.

Where to get a low beam headlight bulb for a Hyundai Santa Fe?

If you prefer to shop in person for the right Low Beam Headlight Bulb products for your Santa Fe, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time! Use the fitment form at the top of the page to select your exact year and engine type for your Hyundai Santa Fe.

Why does my Santa Fe lose light at night?

Dark spot in low beam headlight field causes loss of view for driver as the dark spot passes from object to object. People or animals, even signs lose illumination as the dark spot covers them. Reflective barrels in construction areas lose their reflectivity at night as this spot covers them. This occurs on the low beam function.

How does the smart high beam work on a Hyundai?

Your Hyundai is equipped with a smart high beam feature that when activated, automatically switches from high beams to low beams when an oncoming vehicle is detected, making the roads safe for everybody. Watch this video to learn more.

High beams work fine either on full time or by pulling the switch to pass/momentary position. Checked all relays & fuses, everything checks good, bulbs are good. The electrical connector into the headlight housing has 6 wires.

Your Hyundai is equipped with a smart high beam feature that when activated, automatically switches from high beams to low beams when an oncoming vehicle is detected, making the roads safe for everybody. Watch this video to learn more.

Why does my Hyundai Santa Fe not accelerate?

Here are the most common cause of acceleration with the RPM’s going up: 1. Transmission Fluid Low. If your Santa Fe is too low on transmission fluid, it’ll will no longer be able to transfer power to the rear wheels. The power goes to the torque converter, and that’s the end of the line. You should check the transmission fluid immediately.