Where are the fuses on a Pontiac G5?
Fuse box diagram (fuse layout), location and assignment of fuses and relays Chevrolet Cobalt and Pontiac G5 (2005, 2006, 2007, 2008, 2009, 2010). The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers, and fusible thermal links.
What should I do if my fuel pump is not working?
Fuel pump breakers usually have a button on top that pops up when it trips. Simply push this button back in until it clicks. Check the owner’s manual for the exact location. Fuel Pump Testing – If the fuse is good and the circuit breaker is not tripped; then the engine is not getting fuel pressure.
Where are the fuses on a fuel pump relay?
On the relay, 30 is powered by a fuse from the fuse block. It is shown in the diagram I sent. 30 is for the load side. The control side ground comes from the PCM. When the key is turned on, it will power pin 85. Then after two seconds, it will shut off.
Why does my car have no fuel pressure?
Many people recognize this sound every time they start the car but don’t realize it is the fuel pump running. If you “DO NOT” hear the buzz of the fuel pump; then your engine has no fuel pressure, and we need to see why. The first thing you want to do is check the fuse panel to see if the fuse is blown.
What are the fuses in a Pontiac G5?
Floor Console Fuse Block Fuses Usage 1 Fuse Puller 2 Empty 3 Empty 4 Empty
Why is my Pontiac G5 engine not starting?
There are a lot of issues that can cause your G5 to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code. It is definitely worth it to use an OBDII scanner to check and see if the engine has thrown any trouble codes.
Fuel pump breakers usually have a button on top that pops up when it trips. Simply push this button back in until it clicks. Check the owner’s manual for the exact location. Fuel Pump Testing – If the fuse is good and the circuit breaker is not tripped; then the engine is not getting fuel pressure.
What happens when a fuel pump relay goes bad?
If the fuel pump relay has an issue while the vehicle is operating it will cut off power to the fuel pump, which will cause the engine to stall. A faulty relay may allow the vehicle to be restarted a short while later, while a completely failed relay will not.