Where are the fuses for brake lights located?
Most vehicles have at least two fuse boxes located throughout the body. One is often under the hood with a second fuse box on the driver’s side of the cabin. Refer to your vehicle’s owner’s manual to determine which fuse box houses the fuse for your brake lights.
How is the ABS light different from the brake light?
The ABS light differs from the BRAKE light as it is usually controlled by a computer module. When this light is on, there are often trouble codes stored to help the owner or a technician diagnose the source of the fault in the anti-lock braking system. The BRAKE light on most vehicles is activated by…
Is the brake light the same as the emergency light?
On vehicles where the flashers are separate from the brake lights, this will not apply. The emergency flashers often use the same wiring, bulbs and sockets as the brakes. If all lights come on, when the emergency flashers are turned on, this shows the bulbs, wires and sockets are good.
What to do when your third brake light is not working?
When the lower lights do not come on and only the third-brake light works, the brake-light switch may be ruled out. Again try the emergency-flashers to check for wiring, socket and lamp problems. If the flashers work, check for blown fuses as a few vehicles use separate circuits for the lower and third brake lights.
Which fuse is used for brake lights?
There are two fuses that you will need to check for your brake light circuit. The first will be #9 (Back up light/Instrument light) 7.5A in your under dash fuse box….the second will be fuse #47 (Stop) 20A in the under hood fuse box.
Where is the fuse for the brake lights located on?
To check the fuse, first locate the brake light system fuse in the fuse panel which is either under the dash or under the hood in the power distribution center. Connect the test light to a ground like an engine or dash bracket and turn the ignition key to the “on” position.
Why does my brake light fuse keep blowing?
You see when a fuse blows it’s because it’s lost current, when current is lost the amp draw goes up and pops the fuse. In layman’s terms when you apply the brake and the fuse blows the first thing to check is what the electricity is supplying.
Why are my brake lights not working?
When your brake lights don’t work, it is usually because of a blown fuse, a worn-out or broken brake light switch, or a burned-out light bulb. And on most vehicles, the brake light system is usually a simple circuit that includes a brake light switch, the light bulbs or lamps, a fuse,…