Where are the CV axles on a Toyota Corolla?
The CV (constant velocity) axle shafts on a Toyota Corolla integrate the transaxle of the front wheel drive transmission with the wheel. There are two joint bearings on each end of the CV axle, protectively covered by a rubber boot to keep the joint bearings lubricated,…
How do you remove an axle from a Toyota Corolla?
Remove the hub nut on later model Corollas with the impact gun and a 30 millimeter socket. Lift the Corolla up high enough on the lift to determine if there are inner flange bolts holding the axle to the transaxle housing. The bolts are present in older models of the Corolla. Remove the bolts, if applicable.
How do you remove the hub nut from a corolla?
Place the Corolla on a lift, up to about waist level. Remove the hub cap. Remove the lug nuts with the impact gun and a socket. Remove the wheel. Remove the cotter pin, spindle cap and lock nut on older model Corollas. Remove the hub nut on later model Corollas with the impact gun and a 30 millimeter socket.
Where are the bearings on a CV axle?
There are two joint bearings on each end of the CV axle, protectively covered by a rubber boot to keep the joint bearings lubricated, and to prevent contaminants such as dirt, grit and other debris from adhering to the assembly.
Can a CV axle be replaced on a Toyota Camry?
Here’s a video on the passenger side cv axle replacement performed on a Toyota Camry. This is a longer axle where the axle is “split” in the center by a support bearing. Here’s a video of a axle shaft removal and seal replacement on a Toyota Highlander.
How to replace CV axle shaft and output shaft?
Bolt on the suspension strut to the steering knuckle along with the brake hose bracket bolt. Install the wheel and remove your jack and jack stands. Torque the axle shaft nut to around 150 lbs. Applying your body weight to the breaker bar should put you close to that torque. Fill your transmission with ATF.
When to replace the drive shaft on a Toyota Corolla?
It’s important to replace a defective drive shaft for Toyota Corolla as soon as possible to avoid further damage. With a new axle from AutoZone, you’ll be able to swiftly maneuver corners and handle the road. Enjoy Same-Day Store Pickup when you shop with AutoZone online. Return core parts to the store to be refunded the price.
What are the symptoms of a damaged Toyota Corolla drive axle?
Symptoms of a damaged Toyota Corolla drive axle include strange noises such as clunking after shifting into reverse or popping and clicking when turning the steering wheel. Shaking back and forth when accelerating is another sign of a failed inner CV joint.
How do you replace a CV axle in a car?
You can remove the band from the inner boot to help the old axle pass through. Insert the new CV axle into the transmission housing. Just as you removed the old CV axle, insert the new one into the same spot in the transmission housing. The peg will slide all the way in until the axle is flush against the housing.
How to replace front wheel unit bearings in Toyota 4×4?
You have two options for doing the job: 1st is to buy pre-assembled unit bearings. These are new bearings, seal and 4 bolts with a new wheel hub spindle already pressed into the wheel bearings. This is a direct just swap out the unit bearing and cost about $100 more per side.