When to replace headlight bulbs on Suzuki Vitara?
Suzuki Grand Vitara/ Suzuki Grand Vitara Owners Manual/ Inspection and Maintenance/ Bulb Replacement WARNING: • Light bulbs can be hot enough to burn your finger right after being turned off. This is true especially for halogen headlight bulbs. Replace the bulbs after they become cool enough.
What kind of light does Suzuki Grand Vitara have?
Some Suzukis have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your Grand Vitara has this type of bulb, we do not recommend that you attempt to change it yourself.
Can a parking light burn out on a Suzuki Vitara?
It is possible for the turn signal portion of the bulb to burn out and for the parking light to continue to function properly and vice versa – replacing the bulb will restore functionality of both in your Grand Vitara.
How do you change the light bulb on a Suzuki?
Center Interior Light (if equipped) Pull down the lens by using a plain screw driver covered with a soft cloth as shown. To install it, simply push it back in. The bulb can be removed by simply pulling it out. When replacing the bulb, make sure that the contact springs are holding the bulb securely. Rear Interior Light (if equipped)
Suzuki Grand Vitara/ Suzuki Grand Vitara Owners Manual/ Inspection and Maintenance/ Bulb Replacement WARNING: • Light bulbs can be hot enough to burn your finger right after being turned off. This is true especially for halogen headlight bulbs. Replace the bulbs after they become cool enough.
How to change and replace Suzuki Grand Vitara parts?
If you don’t want to do the work yourself you call a local mobile mechanic service that will come to you at home or any location near you. Suzuki Grand Vitara Headlight Bulb Replacement Suzuki Grand Vitara Radio Removal and Repair 2006-2012 2006-2013 Suzuki Grand Vitara (Escudo) Brake Pad Replacement
What to do if your Suzuki Vitara wont start?
Video instruction Guide on How to diagnose why Suzuki Grand Vitara won’t start or crank up and how to do Auto Repair Service by remove and replacement parts. If you don’t want to do the work yourself you call a local mobile mechanic service that will come to you at home or any location near you. Suzuki Grand Vitara Headlight Bulb Replacement
How to replace a bulb on a Suzuki?
Open the engine hood. Disconnect the coupler. Remove the sealing rubber. Push the retaining spring forward and unhook it. Then remove the bulb. Install a new bulb in the reverse order of removal. High beam Open the engine hood. Disconnect the coupler while pushing the lock release. Turn the bulb holder counterclockwise to remove it.
How do you remove a headlight from a car?
1. Open and prop your vehicle’s hood. 2. Remove the power connector from the back of the headlight. This may require a slight turn to get it loose. 3. Remove the dust cover from the back of headlight. This also may require a small twist to get loose. 4. Some cars have a clip that holds the bulb in place.
What happens when you change the headlight on a Suzuki Vitara?
When you change the headlight on your Grand Vitara, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb. Advance Auto coupon for 20% off entire order: KIOSK20
How do you replace a headlight bulb on a Suzuki?
Grasp a new bulb with a clean cloth. Frequent replacement of a bulb indicates the need for an inspection of the electrical system. This should be carried out by your SUZUKI dealer. If it is difficult to replace headlight bulbs or clearance light bulbs due to under-hood components trust this job to your dealer.
How do you replace a glass light bulb?
There are two types of bulb, “Full glass type” (1) and “Glass/metal type” (2). To remove and install a full glass type bulb (1), simply pull out or push in the bulb. To remove a glass metal type bulb (2) from a bulb holder, push in the bulb and turn it counterclockwise. To install a new bulb, push it in and turn it clockwise.
1. Open and prop your vehicle’s hood. 2. Remove the power connector from the back of the headlight. This may require a slight turn to get it loose. 3. Remove the dust cover from the back of headlight. This also may require a small twist to get loose. 4. Some cars have a clip that holds the bulb in place.