When to remove coolant cap on Mazda 6?
Never remove the radiator cap while the engine is running, or when the engine and radiator are hot. Scalding coolant and steam may shoot out and cause serious injury. It may also damage the engine and cooling system. Turn off the engine and wait until it is cool. Even then, be very careful when removing the cap.
What kind of coolant should I use on my Mazda 3?
If the “FL22” mark is shown on or near the cooling system cap, use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system. If the coolant reservoir is empty or new coolant is required frequently, consult an Authorized Mazda Dealer.
When to check coolant level in Mazda CX 5?
Inspect the antifreeze protection and coolant level in the coolant reservoir at least once a year―at the beginning of the winter season―and before traveling where temperatures may drop below freezing. Inspect the condition and connections of all cooling system and heater hoses.
Where is the coolant reservoir on a Mazda 6?
Verify that the coolant level in the coolant reservoir is between the F and L marks. If the engine coolant level is below L, remove the radiator cap and add coolant. (See COOLING SYSTEM SERVICE WARNINGS.) Drain the engine coolant while the engine is cold, otherwise it may burn you and cause serious injury. 1. Remove the radiator cap. 2.
When to change coolant in a Mazda CX7?
Changing the coolant should be done by an Authorized Mazda Dealer. Inspect the antifreeze protection and coolant level in the coolant reservoir at least once a year―at the beginning of the winter season―and before traveling where temperatures may drop below freezing. Inspect the condition and connections of all cooling system and heater hoses.
Where is the coolant in a Mazda 3?
The coolant should be at full in the radiator and between the F and L marks on the coolant reservoir when the engine is cool. If it is at or near L, add enough coolant to the coolant reservoir to provide freezing and corrosion protection and to bring the level to F.
Is it dangerous to open coolant reservoir in Mazda CX 5?
A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot. You could be burned. Carefully inspect the engine coolant in the coolant reservoir, but do not open it. Switch the ignition to off and make sure the fan is not running before attempting to work near the cooling fan:
When to check antifreeze levels in a coolant reservoir?
Inspect the antifreeze protection and coolant level in the coolant reservoir at least once a year―at the beginning of the winter season―and before traveling where temperatures may drop below freezing. Inspect the condition and connections of all cooling system and heater hoses. Replace any that are swollen or deteriorated.