When to change stator on Harley Davidson Softail?
If the readings are low or zero, switch your meter to reads ohms, shut off the engine, and read the resistance between all five wires. A proper reading is around 0.2 ohms. The reading infinite or “OL” on your meter indicates an open circuit. The stator must be replaced.
What causes no start on Harley Davidson Softail?
A parasitic draw occurs when one or more circuit remains powered after the ignition is turned off. A draw on the battery of more than 0.02 amps can deplete the battery overnight enough to create a no start problem. To test for a parasitic draw, place your multimeter to the amps setting in series with the battery.
How to read diagnostic trouble codes on Harley Davidson Softail?
For 2014 and later models, hold the odometer button down on the lift grip. Move the ignition switch to the ignition position. You’ll see the “DIAG” message displaying. Release the odometer button and press it again to read the different codes at each module.
What kind of warranty does a 1989 Heritage Softail have?
1989 Harley-Davidson Heritage Softail, 1989 Harley Davidson Heritage Softail – Comes with 30-Day Unlimited Mile Powertrain Warranty and Wholesale Buyback Guarantee. 1989 Heritage Softail 2nd owner rides GREAT !
What was the price of a 1989 Harley Davidson Softail?
1989 Harley-Davidson FLSTC – Heritage Softail Classic. $4,995 . Langhorne, Pennsylvania
What kind of CARB does a 1989 Softail have?
’89 Harley Davidson Heritage Softail Classic – 90% original condition except for new Crane cam, mufflers and CV carb. Professionally maintained by certified Harley mechanic.
Where did Heritage Softail motorcycles go for sale?
HERE ARE SOME IVE SOLD OVER SEA’S. 20 CARS TO AUSTRALIA, 1 TO ENGLAND, 3 TO GERMANY, 2 TO HOLLAND 1 TO JAPAN, 1 TO HAWAII, 8 TO CANADA, 2 TO SPAIN, 1 TO ALASKA, 1 TO NEW ZEALAND, 2 TO SPAIN, 2 TO PUERTO RICO, 2 TO AFRICA,1 TO INDONESIA, AND CARS ALL OVER THE US FOR OVER 40 YEARS.
How to check DTC’s on a Harley Davidson Softail?
Press and hold the mute/power button, and then turn the ignition switch to accessories. Keep the mute button held as the system starts up and for three seconds after the warning screen appears. Press the accept option on the touchscreen, then select “DTC’s.” Any active codes will be displayed at this time.
Why is my Harley Davidson Softail not working?
These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause. This article applies to the Harley Davidson Softail.
What does diag stand for on Harley Davidson Softail?
Press and hold the black odometer reset button and turn the ignition switch to the ignition position. Hold the reset button until the message “DIAG” appears. Press and release the odometer button to access the module selection menu. The message “P55PtB” will appear. The letters and numbers stand for the different systems.
If the readings are low or zero, switch your meter to reads ohms, shut off the engine, and read the resistance between all five wires. A proper reading is around 0.2 ohms. The reading infinite or “OL” on your meter indicates an open circuit. The stator must be replaced.
Press and hold the mute/power button, and then turn the ignition switch to accessories. Keep the mute button held as the system starts up and for three seconds after the warning screen appears. Press the accept option on the touchscreen, then select “DTC’s.” Any active codes will be displayed at this time.
These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause. This article applies to the Harley Davidson Softail.
Press and hold the black odometer reset button and turn the ignition switch to the ignition position. Hold the reset button until the message “DIAG” appears. Press and release the odometer button to access the module selection menu. The message “P55PtB” will appear. The letters and numbers stand for the different systems.
How does a Softail work on a Harley Davidson?
Late model Softails use a complex network of computers to monitor the engine, transmission, and braking system. These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause.
Why does my missing plug on my Evo not work?
Especially under a heavy load, like riding up a hill. If you power through this missing, it starts going well at higher revs, but still misses a bit. The plugs look relatively good, but the electrodes get white and the engine gets hot like it’s too lean.
What kind of engine does an Evo have?
Discussion in ‘ Engine, Fuel and Exhaust ‘ started by JBC2565, Jan 14, 2011 . 32K with an S&S upgrade cam and rev-tech 6 sp.