When does the p0106 code go away on Kia Forte?

When does the p0106 code go away on Kia Forte?

Battery drained plus jump start is in the ballpark, so IMO it’s the same set of conditions that triggers the ECM to set this bogus code. Most folks say the code goes away by itself after a few days. But if not, just clear it and (assuming the battery is holding a charge) I’d expect the code to not come back.

What does reflash on Kia p0304 do?

This reflash has enhanced VCM (Variable Charge Motion) Actuator logic to improve a rough idle condition at start-up or a MIL ON and stored DTC P0304 set at start-up. To improve customer satisfaction Kia is requesting the completion of this Service Action on all affected 2010 Forte & Forte Koup w/2.0L engine vehicles.

When did Kia Forte 2.0L engine come out?

There is a Factory Service Bulletin to upgrade the Powertrain Control Module (PCM) of some 2010 Model Year Forte (TD) Sedan and Koup with 2.0L engines manufactured between 3/5/.

What does fault code p0170 mean on Kia?

P0170 Code P0170 (0170) indicates a malfunction in the fuel control system. It is necessary to test the operation of the control unit, as well as the fuel pressure sensor. The problem may be a lack of tightness. P0193 Error P0193 occurs when the fuel rail pressure controller malfunctions or an overvoltage detected on its power line

Battery drained plus jump start is in the ballpark, so IMO it’s the same set of conditions that triggers the ECM to set this bogus code. Most folks say the code goes away by itself after a few days. But if not, just clear it and (assuming the battery is holding a charge) I’d expect the code to not come back.

What to do if your car has a p0304 code?

Use FIXD to scan your vehicle to verify P0304 is the only code present. If other codes are present, they must be addressed first. Check for loose connectors at the ignition coils or for damaged wiring (specifically cylinder 4). Look for loose engine ground wires as well. These can cause random misfire conditions. Tighten or connect where necessary.

When to fix a p0304 spark plug socket?

P0304 should be repaired immediately. Ignoring this error could result in ignition failure, catalytic converter damage, and unsafe/dangerous conditions while operating the vehicle. Loose fitting electrical connectors and broken or disconnected vacuum hoses are often overlooked. 5/8in. Spark Plug Socket