What tools do I need to work on motorcycle?

The Top Ten Most Essential Tools for Motorcycle Riders

1) Tire Pressure Gauge.
2) Screwdrivers.
3) Wrench Set.
4) Ratchet and Socket Set.
5) Hex Keys (AKA Allen wrenches) or Hex Head Sockets.
8) Impact Driver.
9) Torque Wrench.
10) Motorcycle Stands.

What tools do I need to work on a Harley Davidson?

Must-Have Tool List for Harley Davidson Technician Jobs

Torque Wrenches.
A Brake Bleeder.
Impact Driver.
Multimeter.
Allen Key Set.
Socket Wrench Set.
Fork Rebuild Tools.
Building a Must-Have Tool Set for Harley Davidson Technician Jobs.

What should I put in my Harley tool kit?

Look for kits that include items such as an Allen wrench, flathead screwdriver, pliers, and adjustable wrench. It’s also a good idea to have a flashlight, battery cables, zip ties, and a tire repair kit. Note: Make sure the tools are either metric or SAE, depending on what type of bike you ride.

What should I put in my motorcycle tool bag?

What should be in your motorcycle tool bag?

Spare fuses and lightbulbs.
A small flashlight for working in low light (such as when you’re replacing the aforementioned lightbulb).
Zip ties, duct tape and electrical tape.
A utility knife or Swiss army knife to cut tape or zip ties.
A tire repair kit.
Battery cables.

What should I put in my motorcycle bag?

Saddle Bag Essentials

Raingear.
Tool kit.
Tire repair kit.
Air compressor.
Jumper cables.
Work/Nitrile gloves.
Flashlight.
Glow sticks.

Does Harley Davidson use metric or standard?

Most motorcycles use metric fasteners, Harleys being the exception. Remember that metric bikes also need metric measuring tools, since most tolerances are listed in metric units.

Is Harley Davidson standard or metric?

What comes in a Goldwing tool kit?

Contains the following: Open ended wrenches, 11, 12, 13, 14, 16 & 17mm sizes. 10mm combination wrench. 6″ adjustable wrench. 3/8″ drive ratchet wrench.

What do you need to know to be a motorcycle mechanic?

Every motorcycle mechanic needs to know the job basics such as: Knowing his way around ignition points on the motorcycle engine Changing the spark plug Checking and changing the brakes

What kind of tool should a motorcycle mechanic use?

In addition to a basic screwdriver set, a motorcycle mechanic will find that an impact driver is an invaluable tool. These drivers impart a turning and impacting force at the same time, and they should always be used on crosshead engine-casing screws.

What do you need to make a motorcycle?

You’ll also need supplies that aren’t on the list. Rubber gloves, zip-ties, duct tape, electrical tape, parts-cleaning spray (such as WD-40), various lubes, fluids for brakes and radiator, and a selection of basic nuts and bolts are good for starters.

How much does it cost to buy tools for a motorcycle?

While a professional mechanic will typically have upwards of $5,000 worth of tools, you can buy a full tool kit with all the basic tools for less than $100! The home-based mechanic will not need a large, expensive tool kit to do most service and repair jobs on a motorcycle.

What’s the best way to become a motorcycle mechanic?

Self-Employment Motorcycle mechanics have the opportunity to go into business for themselves and become self-employed. Advancing one’s career could mean opening up his/her own repair shop. One of the best ways to learn everything that goes into owning a motorcycle repair shop is by spending an ample amount of time working in one.

How big of a tool set do I need for a motorcycle?

Look for a set that matches the sizes of your sockets; from about 10mm to 17mm will cover most jobs, and get bigger or smaller ones as needed for your specific bike. Check to see if you’ll need standard sizes for your bike too, just like with your sockets.

Navigation