What to do if your Mercedes EZs ignition switch is not working?

If the other key works, keep using it for a couple of weeks to verify that the issue is really the key and not the EIS. Try scanning your Mercedes-Benz for fault codes. Ideally using a Start Diagnostic Scanner. This scanner should still retrieve fault codes when the ignition is off.

Why does my Mercedes Benz not turn on?

A problem that Mercedes-Benz owners may face is the key no longer turns in the ignition. This issue is often caused either by a defective key, bad shifter module, a failed Electronic Ignition Switch (EIS) also known as the EIS-EZS or a bad steering lock module (ESL).

Where is the VIN stored in Mercedes EZs ignition module?

The VIN stored in the Ignition Module (EIS-EZS) matches that of the car; it’s your old module after all. Just install it and you are ready to go. Check out these companies that provide Mercedes EZS EIS Ignition Module online.

What does the fob remote on a Mercedes Benz do?

The newer keys have a transponder integrated in them. The key fob remote serves two purposes. First it disables the anti-theft system when you unlock the car. Second, Drive Authorization System verifies the key to make sure it is the right key to start the car.

Why is my Mercedes-Benz E320 key not turning?

Why Won’t My Key Turn? What are common reasons my Mercedes-Benz E320 key won’t turn? While there are a variety of reasons your Mercedes-Benz E320 key won’t turn, the most common 3 are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.

What kind of key does a Mercedes Benz use?

While most Mercedes-Benz cars have the SmartKey some models such as the ML Class, SLK Class, Crossfire used a metal blade key up to 2005. Some models suffer from the defective key tumbler. We have seen cars with as little as 20,000 miles where the tumbler go bad. Make sure the steering wheel is not in a locked position as mentioned above.

What’s the best way to turn the key in a car?

Push the steering wheel in the direction that allows a little movement and then insert the key and try to turn the key again. You can put pressure on the steering wheel and also try shaking the steering wheel. As you do this insert the key into the ignition and try to turn the key. DO NOT TRY TO FORCE THE KEY IN THE IGNITION.

Why does the key not turn when inserted in the ignition?

The EIS module could also be the reason that the key does not turn when inserted in the ignition. Many car owners complain that the car starts fine on a warm or hot day but in cold days the car will not start. This may sound strange, but it is reported frequently.

Can a Mercedes Benz ignition module be repaired?

There are companies that can repair Mercedes-Benz ignition modules. You will need to remove the ignition module from your Mercedes-Benz and ship it one of these companies that can test and repair the EIS-EZS. Once the module is repaired it is returned to you.

What to do if your Mercedes Benz Radio is not working?

For you to do that, you will need to remove the fuses for the CD Changer, COMAND/ NAV / DVD Player / Radio, Audio Gateway AGW, and the Voice Unit if it is equipped with one, for at least 10 minutes. Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order.

What to do if your Mercedes key won’t turn?

If you have this problem you will have to install a new / virgin EIS. You can not install a used unit because the EIS has to be paired / married to the car using Mercedes-Benz Star Diagnostic Software. They key itself may be the reason why the car doesn’t start. The key may open the doors, but it will not start the car.

Why is my ignition not working on my Mercedes Benz?

It is possible that the battery in the car is defective, as it does not provide the necessary voltage for the ECU and the N73 Electronic Ignition/Starter Switch (EIS) to function properly. If the battery is dead or has low voltage / under voltage, the CAN communication between EIS and N72 may not function properly.

What causes a Mercedes Benz key to not turn?

List of common problems and possible solutions 1 Locked Steering Wheel. New drivers always experience this at least once, so we thought we would include it in this list. 2 Discharged Battery Undervoltage. 3 Key Tumbler Defective. 4 Defective Electronic Ignition/Switch System EIS / N73. 5 Smart Key Remote. …

What to do if the key does not turn in the ignition?

If the key does not turn in the ignition, try moving the steering wheel as you try to turn the key. The steering wheel will feel completely solid if you try to move it in one direction and may move slightly in the opposite direction.

What causes a locked steering wheel to not turn in?

If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.

What to do if your ignition key won’t work?

In this case the ignition lock must be replaced. Step 7 – In extreme conditions such as high mileage or a key chain adorned with many ornaments can wear the tumbler which causes the key not to work. If the door key is same as the ignition key, the door tumbler can be removed and a key made if no security chip is installed, (older cars).

Navigation