What to do if your CTS engine hesitates?
If the mechanic suspects the throttle position sensor, he or she will test the throttle position sensor and it’s wiring to see if it is functioning properly. If it is not, the mechanic will remove the throttle positioning sensor and the wiring and replace them.
Why does my Buick Lucerne engine hesitate during acceleration?
A vehicle with a combustion (gas or diesel) engine requires an exact mixture of fuel and air to run efficiently. If this mixture is thrown off in any way, it may result in an engine running too lean (not enough air), or too rich (not enough fuel).
Why does my car hesitate when I step on the accelerator?
Instead of going faster by stepping on the accelerator pedal, the speed will be reduced. The vehicle may even stumble entirely during these seconds. This is what it means when the car engine hesitates. It is usually the result of a problem with the air and fuel mixture within the combustion chamber.
What should I do if my Honda engine is hesitating?
Let the engine cool. Remove the hose between the air box and the front of the throttle body. Apply a small amount of brake/carburetor cleaner to a rag, and remove the grease, dirt, or oil from around the intake valve. Check for proper throttle movement and operation. Then, re-assemble. The cost for a throttle body cleaner is $4. Figure 2.
What does it mean when your motorcycle engine is sputtering?
Vacuum leaks can cause several problems with the functionality of a motorcycle, especially sputtering. If there’s a vacuum leak, that means the carburetor isn’t giving the proper amount of air to the air and fuel mixture which will ultimately result in sputtering and poor engine performance.
Let the engine cool. Remove the hose between the air box and the front of the throttle body. Apply a small amount of brake/carburetor cleaner to a rag, and remove the grease, dirt, or oil from around the intake valve. Check for proper throttle movement and operation. Then, re-assemble. The cost for a throttle body cleaner is $4. Figure 2.
How to change transmission fluid on Mercedes B200T?
Stephen here to help with your transmission fluid change. The specific answer will depend on which transmission you have, manual or CVT. However, the procedure is basically the same for both: remove the drain plug, drain the fluid, and refill with Mercedes transmission fluid of the appropriate type.