What to do if your blower motor is stuck on high?
If your blower motor only works on high, all you need to do is change the blower motor resistor. It’s a 10 minute repair that only costs about $20. If your blower motor only works on high, all you need to do is change the blower motor resistor. It’s a 10 minute repair that only costs about $20. Skip navigation Sign in Search Loading… Close
What causes a blower motor to not work?
If the blower motor resistors’ internal components fail it may cause the blower motor to malfunction, or not function at all on one or more of the settings. This can also be caused by a blower motor switch, so a proper diagnosis is highly recommended if you are uncertain of what the issue may be.
How can I tell if my blower motor resistor is faulty?
Another symptom of a faulty blower motor resistor is no air from the vehicle’s vents at all. Power to the blower motor is fed through the blower motor resistor, so if it fails or has any issues power can be cut off to the motor.
Where is the fuse box located on a Mercury Mountaineer?
Fuse box located. Passenger compartment fuse panel. The fuse panel is located below the instrument panel on the driver’s side. To remove a fuse use the fuse puller tool provided on the fuse panel box.
If your blower motor only works on high, all you need to do is change the blower motor resistor. It’s a 10 minute repair that only costs about $20. If your blower motor only works on high, all you need to do is change the blower motor resistor. It’s a 10 minute repair that only costs about $20. Skip navigation Sign in Search Loading… Close
Why does my car blower motor not shut off?
If you have a vehicle with climate control system and a variable speed blower motor and the blower motor won’t shut off and stays on HIGH with the car turned off and the key out, chances are the blower motor motor control processor is toast or the HVAC control module is damaged.
Another symptom of a faulty blower motor resistor is no air from the vehicle’s vents at all. Power to the blower motor is fed through the blower motor resistor, so if it fails or has any issues power can be cut off to the motor.
What to do if your climate controlled blower wont shut off?
If your climate controlled blower processor is shot, be prepared to spend mucho bucks for a replacement. But before you start throwing expensive parts at the problem, you’ll have to do some checking. Start by testing the gray/black wire at the blower motor control processor. First, try grounding the wire. Then try removing it.
What are the symptoms of a bad blower motor relay?
3. Melted relay. Another more serious symptom of a problem with the blower motor relay is a burned or melted relay. Relays are exposed to high current loads and can sometimes get hot when they develop problems.
What causes a fuse to blow on a blower motor?
If the blower motor relay develops any sort of problem that hinders its ability to properly limit and distribute power, it may cause the blower motor fuse to blow. Any sort of electrical spikes or excessive current from a bad relay will blow the fuse and cut power in order to protect the system.
Where is the blower control switch on the dashboard?
The blower control switch on the dashboard controls the circuit flow of the blower motor to adjust the voltage from low, to medium, to medium-high, to high. When on high, the circuit bypasses the blower resistor.
Why does my car heater blower not work?
When this happens, you may notice that you will not feel anything blowing out of the vents at all. This may also cause the blow motor to work intermittently. I would suggest having an expert from YourMechanic come to your location to diagnose your vehicle’s blower motor system.
Why does the blower motor relay not work?
This suggests that the relay may be supplying power to the blower motor regardless of turning the switch off. The blower motor relay supplies power to this motor when you turn the switch to “on” that can sometimes fail. When this happens, you may notice that you will not feel anything blowing out of the vents at all.
What to do if your car heater is stuck?
When the battery is dead, you can bypass the shift interlock solenoid by inserting a screwdriver into the manual override slot. On your vehicle, I believe the override…
Why is the blower motor not working on my car?
My car has an automatic transmission. Hi There, The resistor is what controls the speed of the blower motor, not the relay. The blower motor relay supplies power to this motor when you turn the switch to “on” that can sometimes fail. When this happens, you may notice that you will not feel anything blowing out of the vents at all.
How does a high speed blower motor work?
In the highest fan speed state, the blower resistor is bypassed completely and the fan is effectively connected directly to the car’s battery, allowing maximum current to be supplied to the blower motor.
Why is the resistor not working on my blower?
Hi There, The resistor is what controls the speed of the blower motor, not the relay. The blower motor relay supplies power to this motor when you turn the switch to “on” that can sometimes fail. When this happens, you may notice that you will not feel anything blowing out of the vents at all.