What size Tyres are on an Audi A3?
205/55 R16
Audi A3 wears tyres of 205/55 R16 91V size.
How do I know what size alloys fit my car?
There are 10 aspects that are critical for your choice of alloy wheel to fit properly:
- The Wheel PCD (Pitch Circle Diameter / Stud Pattern)
- The Front and Rear Wheel Offset (ET)
- The Wheel Diameter.
- The Front and Rear Wheel Width/s.
- The Front and Rear Tyre Size.
- The Wheel Load Capabilities.
- The Tyre Load Index.
- The Centre Bore.
What wheels fit Audi A3 8p?
Audi – A3 8P (2003 – 2012)
| PCD: | 5×112 |
|---|---|
| Mounting: | Bolt – 14 x 1,50 |
| Wheel torque steel: | 110 Nm / 81 ft-lb |
| Wheel torque alloy: | 110 Nm / 81 ft-lb |
| Possible tire sizes: | 195/65R15 205/55R16 225/45R17 225/40R18 235/35R19 235/30R20 |
What stud pattern is Audi A3?
5×112 bolt pattern. 66.6 bore. Rear wheel offset and bolt pattern?
What should my TYRE pressure be Audi A3?
For Audi A3 the suitable tyre pressure is 32psi in front and 30 psi in the rear if the tyre is for a 16 inch wheel while for a 17 inch wheel the recommended tyre pressure is 30psi in front and 29 psi in rear tyres.
Are all 4 stud wheels the same?
Not all 4 stud wheels are the same Pitch Circle Diameter (PCD) although a 100 PCD is most common. Use this wheel suppliers site and key in each of the two cars and you’ll that Acura wheels should mount on the Rio.
What size are my wheel trims?
Wheel trims are are usually measured in inches and refer to the diameter of your car’s wheels (13/14/15/16 and 17 inch). To find the size of the wheel trims you require, look on the sidewall of your tyre and you will see a series of numbers. The number following the letter R is your wheel size in inches.
Where is the tyre pressure on a Audi A3?
The recommended tyre pressure for your vehicle is listed in the maintenance guide, displayed on a sticker on the inside front door (often passenger side) or even on the vehicles fuel cap.