What should the temperature of the engine be?
Read on and learn everything you need to know about your car’s temperature gauge. The ideal engine temperature should be somewhere between 195 and 220 degrees. An engine is operating normally when the needle points at the center or near the center of the gauge.
What causes an engine temperature gauge to stay on cold?
Reasons Why your Engine Temperature Gauge Stays on Cold 1. Faulty Engine Coolant Temperature Sensor 2. Faulty Gauge/Cluster 3. Broken wires to the sensor or to the gauge 4. Bad Thermostat 5. Corrosion in connectors 6. Air in the coolant system 7. Broken engine control unit
What does intermittent mean on car temperature gauge?
The code indicates that a wire from the engine coolant temperature sensor, is shorting to ground, or open, somewhere. Of course, “intermittent” means: sometimes. The engine computer, in response, turns on the engine cooling fans, to lower the reported hot engine coolant temperature.
What’s the error code on the temperature gauge?
It continued for some time and after a couple of weeks the check engine light came on with the error code P0118. I then had the ECT sensor replaced. However after a few months the same behavior started with the temperature gauge and i again got the P0118 error code.
Read on and learn everything you need to know about your car’s temperature gauge. The ideal engine temperature should be somewhere between 195 and 220 degrees. An engine is operating normally when the needle points at the center or near the center of the gauge.
Reasons Why your Engine Temperature Gauge Stays on Cold 1. Faulty Engine Coolant Temperature Sensor 2. Faulty Gauge/Cluster 3. Broken wires to the sensor or to the gauge 4. Bad Thermostat 5. Corrosion in connectors 6. Air in the coolant system 7. Broken engine control unit
How can I tell if my engine is having a backfire?
Valve issues may also involve poor fuel economy, rough idle, stalling, high oil consumption, hard starting, and exhaust smoke. Valve problems of these type tend to create a more consistent backfire condition. You may diagnose valve problems at home with the use of a compression gauge or a vacuum gauge.
What causes a car engine to backfire when there is not enough fuel?
If your fuel injectors are clogged up and not sending enough fuel into the intake of your engine this can also be a cause for your engine to backfire. Checking your fuel injectors may not be that easy of a task as you may have to remove the fuel rail from your engine to check the fuel injectors if your engine.