What should the point gap be on a VW distributor?
This video applies to aircooled VW’s only. Note that if you have electronic ignition installed in your distributor, this process will not work. This specifically applies to vehicles with a points and condenser setup. VW Point Gap setting for aircooled VW distributors is 0.016″.
What should the valve clearance be on a VW?
So with the advent of the 1600cc engine which produces more heat (resulting is hotter running valves), VW started recommending 0.006″ for a bit more leeway for the valves. You can still use 0.004″ in those engines too though, so long as the clearances are checked regularly.
How do you find the ring gap on a street engine?
A feeler gauge inserted into the ring gap will show you the existing dimension, and from there you can make your adjustments. For a street engine, multiplying your bore size by 0.004in will give you the top ring gap you are looking for.
Do you need to set the spark plug gap?
Spark Plug Gap setting is important for proper engine operation. To set the spark plug gap correctly, you need to use a spark plug gap tool. For reference, see our spark plug gap chart below, this chart converts metric measurements to standard.
What’s the gap between the electrodes on a VW?
Put the plugs back into the cylinder they came from. If necessary, clean the plugs or install new ones. Set the gap between the bottom bent electrode and the center straight electrode to 0.028″ using the feeler gauge on the gapping tool. The bent electrode can be carefully bent in and out with the gapping tool to make the adjustment.
How big is the breather hose on a VW Beetle?
A 6-inch length of rubber breather hose, 1/2-inch ID. Pull the spark plug connectors off all four spark plugs (if you have not done so already for the compression test.