What should I do if my OBD2 is not linking?
Autel AL519 Autel Autolink al319 Launch Scan Tool Launch x431 Launch crp129 Launch crp123 Innova Scanner Innova 3030 Innova 3040 Foxwell Scanner Foxwell NT301 FOXWELL NT510 Foxwell NT624 FOXWELL NT630 Actron Scanner Actron CP9690 Actron CP9680 Actron CP9670 Other Bluedriver OBD2 Bluetooth Scanner Konnwei KW808 Bafx 34t5
Where are the fuses for the OBDII port?
Thanks. Check fuse #62, under the hood. Check fuse #62, under the hood. Click to expand… Thanks for that suggestion. I just double checked the fuses under the hood in the compartment with the 38 pin port and the diagram only shows fuses up to #45 under the hood or under the back seat.
Where are the fuses on a Mercedes Benz are class?
Cigar lighter (power outlet) fuses in the Mercedes-Benz R-Class are the fuses #43, #44, #45 and #46 in the Luggage Compartment Fuse Box. The fuse box is located on the passenger side of the instrument panel, behind the cover. The battery compartment prefuse box is located next to battery under the front passenger seat.
Why do I get No reading on my OBD codes?
Check your fuses to see if any have gone bad. Remember that your car or truck might have more than one fuse box. This should be covered in your owner’s manual or a proper service manual. Another reason for getting no reading is that the scan port has become clogged with dust after years of not being used.
Where are the fuses on a Mercedes R-class?
Whether looking for the cigarette lighter, radio , COMAND or Navigation fuse location, here you will find a lift of all the fuses on your R-Class. Location of the fuse box panels on Mercedes-Benz? Side of dashboard. (Passenger side) Under the passenger seat. Fuses are next to battery. In the rear, trunk on passenger side.
Autel AL519 Autel Autolink al319 Launch Scan Tool Launch x431 Launch crp129 Launch crp123 Innova Scanner Innova 3030 Innova 3040 Foxwell Scanner Foxwell NT301 FOXWELL NT510 Foxwell NT624 FOXWELL NT630 Actron Scanner Actron CP9690 Actron CP9680 Actron CP9670 Other Bluedriver OBD2 Bluetooth Scanner Konnwei KW808 Bafx 34t5
Do you need a fuse for the OBDII port?
But, I believe that the “C4” version of SDS (the wifi version most shops have now) has its own power supply, so it can talk to the car’s systems over OBDII without that fuse. The older C3 version of SDS (with the RS232 breakout box), like most generic OBDII scanners, does require power from the OBDII port. One more update to this thread.
Check your fuses to see if any have gone bad. Remember that your car or truck might have more than one fuse box. This should be covered in your owner’s manual or a proper service manual. Another reason for getting no reading is that the scan port has become clogged with dust after years of not being used.