What oil does a 1985 Honda Big Red take?
Honda GN4 10W-40
3 Quarts of Honda GN4 10W-40 4-Stroke Motorcylce Oil.
How much oil does a 250 Big Red hold?
3 Quarts of Honda GN4 10W-40 4-Stroke Motorcylce Oil. **Kit includes One Genuine Honda OEM Oil Filter and One Crush Washer.
How much oil does a 1985 Honda 250sx take?
It is on the right side under the small plastic cover. 10w-40 and 2.2 quarts if you completely drain it. You would do good to look around for a manual for it.
How wide is a Honda 250sx?
Overall Width: 44.8 in. Ground Clearance: 6.5 in. Seat Height: 27.8 in.
How much oil does a Honda ATC 110 hold?
ATC110 Technical Data
| Production Years : | 1979-1985 |
|---|---|
| Oil Capacity : | 1 QT |
| Carburetion : | 16mm Keihin |
| Starting system : | Recoil Starter |
| Fuel capacity : | 1.6Gal, 0.3Gal Res. |
How much oil does a Honda Big Red 250Es hold?
Oil Capacity: 1.59 Quarts (full disassembly) 1.16 Quarts (normal oil change) Oil Filter: Pleated paper type Lubrication System: Forced pressure and wet sump Intake valve: OPENS 8 deg. BTDC @ 1 mm lift CLOSES 35 deg. ABDC @ 1mm lift Exhaust valve: OPENS 40 deg. BBDC @ 1mm lift CLOSES 5 deg. ATDC @ 1mm lift Valve Clearance: Intake 0.08mm (0.003 in)
What kind of oil does a big red ATC 250 take?
Engine oil filter: Emgo 10-99200 Rear differential oil capacity: 3.4 oz. (SAE 80 hypoid gear oil) Front fork oil capacity: 3.8 oz. +/- 0.08 oz. Tire pressure: 2.2 psi Rims: size 9 X 9 bolt pattern (4 X 110) for both front and rear Pilot screw: 2 turns out from seated Needle clip position: 2nd groove from top Tailight: 12V 5W X 2 bulb # 194
How much oil is in a EMGO 10-99200?
Idle speed: 1,400 RPM +/- 100 RPM Engine oil capacity: 2.2 quarts Engine oil filter: Emgo 10-99200 Rear differential oil capacity: 3.4 oz. (SAE 80 hypoid gear oil) Front fork oil capacity: 3.8 oz. +/- 0.08 oz. Tire pressure: 2.2 psi Rims: size 9 X 9 bolt pattern (4 X 110) for both front and rear Pilot screw: 2 turns out from seated
How many gallons does a Honda Big Red ATC 250 hold?
Tire pressure: 2.2 psi Rims: size 9 X 9 bolt pattern (4 X 110) for both front and rear Pilot screw: 2 turns out from seated Needle clip position: 2nd groove from top Tailight: 12V 5W X 2 bulb # 194 Fuel capacity: 3.2 gallons (.53 gallons reserve) 1985 Wheel nuts front and rear: 36-43 ft-lbs 1986 Wheel nuts front and rear: 36-43 ft-lbs
Engine oil filter: Emgo 10-99200 Rear differential oil capacity: 3.4 oz. (SAE 80 hypoid gear oil) Front fork oil capacity: 3.8 oz. +/- 0.08 oz. Tire pressure: 2.2 psi Rims: size 9 X 9 bolt pattern (4 X 110) for both front and rear Pilot screw: 2 turns out from seated Needle clip position: 2nd groove from top Tailight: 12V 5W X 2 bulb # 194
Oil Capacity: 1.59 Quarts (full disassembly) 1.16 Quarts (normal oil change) Oil Filter: Pleated paper type Lubrication System: Forced pressure and wet sump Intake valve: OPENS 8 deg. BTDC @ 1 mm lift CLOSES 35 deg. ABDC @ 1mm lift Exhaust valve: OPENS 40 deg. BBDC @ 1mm lift CLOSES 5 deg. ATDC @ 1mm lift Valve Clearance: Intake 0.08mm (0.003 in)
Idle speed: 1,400 RPM +/- 100 RPM Engine oil capacity: 2.2 quarts Engine oil filter: Emgo 10-99200 Rear differential oil capacity: 3.4 oz. (SAE 80 hypoid gear oil) Front fork oil capacity: 3.8 oz. +/- 0.08 oz. Tire pressure: 2.2 psi Rims: size 9 X 9 bolt pattern (4 X 110) for both front and rear Pilot screw: 2 turns out from seated
Where to buy 1985 Honda atc250es Big Red parts?
Dennis Kirk has been the leader in the powersports industry since 1969, so you can rest assured that we have your back when it comes to bringing you the best 1985 Honda ATC250ES Big Red products. You’ll enjoy our no-hassle return policy and all orders over $89 receive free shipping, so you can shop with complete confidence at Dennis Kirk!