What kind of timing belt does a Honda Accord use?
An exposed Honda Accord/Acura CL timing belt. The Honda F23 series engine is a 2.3 liter, all-aluminum block, 16-valve, single overhead camshaft (SOHC) motor used in the Honda Accord (1994–2002) and Acura CL (2.3L). Timing belt failure may result in either the intake or exhaust valves bending after contacting the pistons.
How to find a genuine Honda Accord drive belt?
Enter your VIN for the most accurate results. Enter your VIN for the most accurate results. We offer a full selection of genuine Honda Accord Drive Belts, engineered specifically to restore factory performance. Please narrow the Serpentine Belt results by selecting the vehicle.
What kind of timing belt does an Acura CL have?
F23 Timing Belt Part Cross Reference Make Model Year Acura CL 1997–1999 Honda Accord DX, LX, EX 1994–2002 Honda Odyssey 1997 Isuzu Oasis 1998–1999
What kind of engine does a Honda Accord have?
The Honda F23 series engine is a 2.3 liter, all-aluminum block, 16-valve, single overhead camshaft (SOHC) motor used in the Honda Accord (1994–2002) and Acura CL (2.3L). Timing belt failure may result in either the intake or exhaust valves bending after contacting the pistons.
How often should the timing belt be replaced on a Honda Accord?
As per Honda, your timing belt needs to be serviced every 50,000 to 80,000 miles. While you’re in there, there are a few other important things to address like the timing balancer and the water pump. This article will guide you through the process of replacing the timing belt, timing balancer, and the water pump on your Accord.
Can A P / s bolt be removed from a Honda Accord?
Figure 3. P/S bolt and tensioner. The power steering pump can be removed from its bracket to gain more room. The hoses do not need to come off. The alternator as well as its related belt will need to come off in order to gain more clearance to the timing belt and water pump.
Can a power steering pump be removed from a Honda Accord?
The power steering pump can be removed from its bracket to gain more room. The hoses do not need to come off. The alternator as well as its related belt will need to come off in order to gain more clearance to the timing belt and water pump. Loosen the adjusting bolt (yellow).
Do you need to change timing belt and water pump?
If the cooling system contains original Honda coolant, a simple drain-and-fill with new Honda coolant is adequate. The valve cover must be removed or raised to remove the upper timing belt cover. A new valve cover gasket is highly recommended to avoid future gasket leaks.
How is a timing belt used in an engine?
An engine timing belt is a fiber reinforced, toothed drive belt manufactured using durable compounds such as highly saturated nitrile. The timing belt allows the crankshaft to drive the camshafts in the cylinder head at half the RPMs of the crankshaft.
How do you replace the timing belt on a Honda Accord?
Install the timing belt drive pulley. Install the tensioner. Install the water pump pulley. Install the camshaft pulley. Loosen and tighten the adjusting nut to tighten the tensioner belt. Install the timing balancer belt pulley and lower cover. Then, tighten the bolts. Install the crank pulley and bolt.
How to remove timing belt and timing balancer?
Timing tensioner. Before moving on to the next step, it’s wise to drain the coolant. Place a pan under the car, and turn the petcock on the bottom of the radiator to release. Now that the coolant has been drained and the timing belt as well as the balancer have been removed, the water pump can come out. Remove the bolts in red (Figure 12).
Where are the TDC marks on the timing belt?
TDC marks are in red (Figure 10). Loosen the adjusting nut in red (Figure 11). Push belt tensioner down. The yellow in Figure 11. Tighten the adjusting nut, and remove the timing belt. Figure 10. Timing belt TDC marks.
When to replace timing belt on Honda Odyssey?
An error occurred while retrieving sharing information. Please try again later. OIL LEAK!! Diagnose Replace Gasket VTEC Assembly Honda Odyssey Accord √ fix it angel
When to replace timing belt on Acura RDX?
The timing belt system includes idler pulleys and a belt tensioner. These components should be replaced along with the belt. On some cars, the timing belt drives the engine’s water pump. Mechanics will usually recommend replacing the water pump at the same time that the timing belt is replaced.
Timing tensioner. Before moving on to the next step, it’s wise to drain the coolant. Place a pan under the car, and turn the petcock on the bottom of the radiator to release. Now that the coolant has been drained and the timing belt as well as the balancer have been removed, the water pump can come out. Remove the bolts in red (Figure 12).
Does the Honda Accord come with a timing chain or belt?
Honda Accord Timing Overview (All Model Years) Over the years Honda Accords have come equipped with both engines that have timing belts as well as engines that have timing chains. From model year 2018 and later all Honda Accord engines came equipped with a timing chain.
When does timing belt need to change for Honda Accord?
The timing belt on a Honda Accord generally needs to be replaced about every 60,000-100,000 miles. When it’s time to replace your timing belt, it’s a good idea to ask your mechanic to check the water pump, timing belt, and pulleys all at the same time.
Does your Accord have a timing belt or chain?
Luckily, there’s a handy guide. If your Honda Accord dates back to 1997-2002, it has a timing belt . If you have a 4-cylinder model from 2003-2007, you engine has a timing chain; if you have the V6 model from those years, it’s a timing belt. An Accord from 2008-2012 with a 4-cylinder engine will have a timing chain, whereas the V6 engine models have a timing belt. From 2013-2017, the 4-cylinder models still have a timing chain and the V6 models have a timing belt.
How much does it cost to replace a timing belt on?
“Now, more people know about it and what can happen when it breaks.” Replacing a timing belt for preventive reasons typically costs $500 to $900 . However, replacing a broken timing belt may cost up to $2,000 or more if it caused damage to the valves, pistons or water pump.