What kind of switch do I need for my Jeep Wrangler YJ?
If you have a 2018, confirm that you have a JL or JK. Don’t see your Wrangler Year? Sturdy, waterproofed Jeep Wrangler YJ switches made out of marine grade materials are extremely useful for upgrading your vehicle with new lights and accessories.
How do you change the wiper motor on a Jeep Wrangler?
You have to unbolt the struts from the windshield frame and lay the frame out on the hood to switch the wiper motor. Getting the plug undone is the tricky part. The part that is on the motor side will fit through the opening in the top of the dash, but the part on the Jeep harness side doesn’t.
How do you remove a wiper switch from a car?
Two screws hold each the turn signal and wiper switch into their housings, and the electrical connector can be disconnected to remove the switch from the car. Once open, the switch contacts can be cleaned with electrical contact cleaner and sandpaper to allow for proper contact.
Why is my wiper switch not working at all?
Symptoms include the turn signal not functioning at all on one or both sides, or the switch having to be in a certain spot to work, despite the bulbs and relays checking out okay. This is usually due to worn contacts in the turn signal or wiper switch.
Where can I buy YJ Wrangler wiper parts?
YJ Wrangler Wiper Parts | 4WD.com With 30 years in the Jeep parts business, 4WD is your source for low prices and fast shipping on Jeep tops, lift kits, and other Jeep accessories. Welcome Guest Sign In SHOP JEEP PARTS
If you have a 2018, confirm that you have a JL or JK. Don’t see your Wrangler Year? Sturdy, waterproofed Jeep Wrangler YJ switches made out of marine grade materials are extremely useful for upgrading your vehicle with new lights and accessories.
Why are my wipers not working on my Jeep Wrangler?
Ok, New motor installed, checked wipers bee in stall, they move freely, they are still disconnected, jump.the delay module, plug the ends into each other,smoke comes out of the stitch around the steering column, next? Sounds like you have a short in the wiring. I’d find out where the short is and if it’s within the switch or harness, replace it.
How can I get my windshield wipers to work?
My squirters work just fine, its just the windshield wipers. The wiper motor is fairly cheap, I have seen them on Ebay for around $35. You have to unbolt the struts from the windshield frame and lay the frame out on the hood to switch the wiper motor.