What kind of oil does my 2003 Yukon take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 6 quarts (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
What type of oil does my GMC Yukon take?
Both available engines in the 2019 GMC Yukon take 7.57 liters (8 quarts) of 0W-20 engine oil. This is a synthetic fluid that reduces friction by keeping all moving components in the engine lubricated. It also helps to keep it cool.
How often should I change the oil in my GMC Yukon?
If you do wait and servicing is overdue, you risk severe damage to the engine – which could leave you stranded or worse. GM recommends that an oil change should be completed within two fuel tank fill-ups from when the first message was displayed.
How do you change the oil in a Chevy?
For second generation models (2007-2013): Step 1: Insert key into the ignition and turn the vehicle to the “ON” position. Do this without starting the vehicle. Step 2: Press the accelerator pedal to the floor three times within five seconds. The “CHANGE OIL SOON” light should begin to flash, which means the system is resetting.
How does the GMC engine oil life system work?
Most GMC vehicles are equipped with the engine Oil Life System (OLS). This system interprets your vehicle’s speed and engine temperature and continuously monitors operating conditions—which helps determine when it’s time for an oil and filter change.
How can I Reset my GMC after an oil change?
Your Certified Service technician will reset your Oil Life System after an oil change. If you would like to reset the system yourself, ask your technician how, or consult your GMC Owner’s Manual if necessary. Consult your vehicle Owner’s Manual for the manufacturer’s suggested oil change interval.
Why do I need an oil change on my GMC?
An oil change, which drains old oil and replaces with fresh new oil, helps to keep an engine properly lubricated. Years ago, engine oil changes were typically prescribed at a set interval, which was usually based upon mileage.
How long does GMC engine have to be off to check oil level?
If unable to wait two hours, the engine must be off for at least 15 minutes if the engine is warm, or at least 30 minutes if the engine is not warm. Always consult your GMC vehicle Owner’s Manual for the proper procedure to check your oil level.
Most GMC vehicles are equipped with the engine Oil Life System (OLS). This system interprets your vehicle’s speed and engine temperature and continuously monitors operating conditions—which helps determine when it’s time for an oil and filter change.
When do I need to change the oil in my car?
A vehicle that regularly carries heavy loads or tows trailers daily may put more strain on the engine, and need an oil change before it reaches a 3,000 mile interval. Conversely, a vehicle used for mild highway driving in warm climates may have oil that’s still good for another couple thousand miles or so.