What kind of fork oil do you use on a Softail?
The capacity varies by model but for most Softails and Dynas this amount is about 9 to 10 oz. If using Harley brand fork oil then type “B” or “E” is recommended depending on the model. The alternative product for those who require superior performance is Shock Therapy #10 Fork Oil which can be used in place of either type oil.
What kind of fork oil does a Harley Davidson use?
If using Harley brand fork oil then type “B” or “E” is recommended depending on the model. The alternative product for those who require superior performance is Shock Therapy #10 Fork Oil which can be used in place of either type oil. Avoid using ATF transmission fluid . This can be too light for most heavy big twins…
When to use shock lubricant on a fork?
Only use new fork lubricant from a sealed container. Unused portions should be kept air tight and stored in a cool dry place. I recommend discarding previously opened containers of shock lubricant not used within 6 months of opening.Slowly pump the forks to distribute the oil and dislodge any air bubbles after filling.
What’s the difference between a Dyna Softail and a Wide Glide?
The standard seat height on a Softail is 1 inch lower than that of the Wide Glide. The Softail is also longer, but only by a fraction of an inch. The Wide Glide has a 4-inch-wider wheel base. There is a significant weight difference between the two bikes. The standard Softail weighs 695 pounds dry, while the Wide Glide only weighs 647.
What kind of fork does a Wide Glide have?
The Wide Glide front end that you see in the pictures is a pre-2000 single-disc with 41mm fork tubes, H-D part # 45674-80c. The ’80’ tells it is a 1980 year beginning manufacture part, but remember that Harley puts production numbers on a lot of parts that aren’t actual part numbers.
How big are the tubes on a Showa fork?
XL1986-87 XL, 1987 FXR-FXRS models with showa fork except FXRT-FXRD. 35mm. 1983-86 FXRT-FXRD, 1984-85 FXSB, 1985-86 FXRS with sport package. 35mm. because they may not always be original equipment. Before installing, compare old and new tubes. Be sure the stock top plugs fit into the new fork tubes. To oil before installing into fork legs.
How to set a fork oil level on a Harley Davidson FLHX?
The correct procedure for setting the fork oil level on any FLH, including the FLHX, is arcane. You put the right amount of oil in and then, using a special tool that looks like a bicycle pump, you take just a little bit out. Worse, the tool is sold only by Harley-Davidson.
Do you have to drain front fork fluid?
In addition, you’ll receive sixteen video downloads, access to GOLD member LIVE events, and so much more! Fork fluid can be tricky and slippery. Bob and Mark drain the fluid and remove the fork from the Dyna. Check your service manual. If you do not have to remove the forks, see our other videos on Front Fork Fluid change.