What kind of coolant does a 2003 Hyundai Elantra take?
Antifreeze/Coolant Prestone 1 Gallon Yellow 50/50 Coolant/Antifreeze.
How do you change the coolant in a Hyundai Elantra?
Lift the front of the vehicle with a floor jack and then place jack stand under the front frame rails to support the vehicle. Place the drain bucket beneath the petcock valve of the radiator and then turn the petcock counterclockwise. As the trickle of coolant pours, crawl out from under the Elantra and remove the radiator cap from the radiator.
Where is the drain bucket on an Elantra?
Start the engine of the Elantra with the radiator cap still off and the drain bucket positioned below the radiator cap. This will allow the Elantra to burp any air bubbles in the coolant system to purge out of the radiator and fall into the bucket.
How to flush the coolant in a Hyundai Santa Fe?
Drain Coolant – Drain the coolant from the system 9. Circulate Water – Run engine with distilled water and flush 10. Fill Coolant – Dilute coolant with distilled water and fill 11. Locate Hoses – Locate the coolant hoses and connection points 12. Burp System – Remove excess air in the cooling system 13.
What kind of coolant does a Hyundai Getz use?
Be sure to check your owners manual to determine the correct type of fluid to add – for Hyundais, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water.
What kind of coolant does a Hyundai Elantra use?
Adding engine coolant (also known as antifreeze) to your 2003 Hyundai Elantra is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter. Make sure to check your engine when it is cold for an accurate reading.
Drain Coolant – Drain the coolant from the system 9. Circulate Water – Run engine with distilled water and flush 10. Fill Coolant – Dilute coolant with distilled water and fill 11. Locate Hoses – Locate the coolant hoses and connection points 12. Burp System – Remove excess air in the cooling system 13.
Be sure to check your owners manual to determine the correct type of fluid to add – for Hyundais, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water.