What kind of brakes do GMC Sierra 1500 have?
I have a 2003 Gmc Sierra 1500 ext cab 4×4 Z71. Ive only owned it a little over a year but as long as Ive had it the brakes have been very soft, I have to push the pedal nearly to the floor for anything to happen. I was going to start replacing all the calipers, rotors and pads but though I might be able to find some upgraded parts form newer years.
Why does my Silverado have soft brake lines?
Could be worn out soft brake lines. Those expand when the pedal is pressed, causing a soft pedal feel. Should be able to see it visually with someone pushing the pedal. I also had to change the calipers and because of a stupid mistake, the master cylinder sucked air on my 2011 Silverado.
Is there such a thing as a soft brake pedal?
But then it was a super soft pedal. took it around the block, slammed on the brakes a few times and managed to get them to lock up a bit (trying to clear air from the ABS). Then got another almost quart through, and thought some air out (hard to tell doing it alone), but still soft.
What kind of truck is a GMC Sierra?
From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. I have a 2003 Gmc Sierra 1500 ext cab 4×4 Z71.
I have a 2003 Gmc Sierra 1500 ext cab 4×4 Z71. Ive only owned it a little over a year but as long as Ive had it the brakes have been very soft, I have to push the pedal nearly to the floor for anything to happen. I was going to start replacing all the calipers, rotors and pads but though I might be able to find some upgraded parts form newer years.
How long has my soft brake pedal been on?
Enter your ride HERE to be a part of this months Ride of the Month Challenge! ’06 2500 HD CrewCab ShortBox 225,000Kms. I’ve been battling a soft, spongy brake pedal since I got the truck – about 18 months now.
Could be worn out soft brake lines. Those expand when the pedal is pressed, causing a soft pedal feel. Should be able to see it visually with someone pushing the pedal. I also had to change the calipers and because of a stupid mistake, the master cylinder sucked air on my 2011 Silverado.
What kind of brakes does a GMC 3500HD have?
NEW PSC STEERING BOX. 2011 GMC 3500HD DUALLY Welding Bed, 4WD CREW CAB, 4″ downpipe back exhaust, def delete, egr delete, with new LB7 up pipe, pcv reroute, Fass 150, EFI live with DSP 5, HSP CAI. Air Lift Air bags.
What causes spongy brake pads on GM trucks?
Although you already bled the system, make sure that you got all of the old fluid out. Bleed until clean fluid comes through. This is a common problem on the GM trucks. The problem is with the pins that the caliper slides on and the fit of the pads in the caliper. Start by removing the pins and make sure they are clean and free of corrosion.
How can I tell if my Silverado has spongy brakes?
If one is noticeably softer than the other, trace the line along that route and test each component (E.G., flexible lines for swelling under pressure, wheel caliper leaks). Also check to see that rotor thickness is still within specs. Although you already bled the system, make sure that you got all of the old fluid out.
What causes a soft brake pedal on a Chevy?
Soft or Spongy Brake Pedal: Too much air in the system due to improper bleeding is usually the cause of this problem. However, it can also be due to fluid loss or a low fluid level. Bleed the brake lines as recommended by Chevy to fix this. You could also have a ballooning brake hose when the brakes are applied.
Although you already bled the system, make sure that you got all of the old fluid out. Bleed until clean fluid comes through. This is a common problem on the GM trucks. The problem is with the pins that the caliper slides on and the fit of the pads in the caliper. Start by removing the pins and make sure they are clean and free of corrosion.