What is the stall speed of a stock 700r4 torque converter?
1600-1800 RPM
Most factory torque converters are 12-13 inches in diameter and have a stall speed of 1600-1800 RPM.
What stall speed converter do I need?
When choosing the stall speed that is right for your application, a rule of thumb is that the advertised stall speed will need to be at least 500 rpm higher than the beginning of the camshaft’s powerband.
How does a 700R4 lockup converter work?
The TCC solenoid engages, locking up the converter. When the trans downshifts to Third gear, the pressure switch opens, interrupting flow through the relay to unlock the TCC solenoid. Alternatively, the driver can unlock the converter at any time by toggling the dash switch to the “Off” position.
How do I choose a stall torque converter?
Ideally you want the stall to lock up somewhere close to the peak torque of the engine. Typically engines that produce more low-end torque will increase the stall speed. The same converter will stall at a lower rpm behind a less torquey – higher rpm engine.
Is there a torque converter for a 700R4 200-4R?
” Power Raptor Lock-up Torque Converter 700R4 2004R” Fits 700R4, 200-4R and non-LS1 4L60E transmissions. This is a 10 inch converter with a 12 inch lock-up carbon fiber clutch rated up to 700 horse power. Can be ordered in stall speeds of 2000 to 4000 RPM.
How big is a 4L60E Super Street Raptor torque converter?
” Eleven Inch Super Street Raptor Torque Converter 4l60E LS1″ Fits 4L60E transmissions, 1998 up LS1 type motors only . This 11 Inch stall converter is balanced, has furnace brazed fins, all bearing construction and a Sonnax carbon fiber clutch . This converter is lighter and has an inch smaller diameter than the stock size.
What’s the stall speed of a torque converter?
This Performance torque converter stalls at 2200 to 2500 RPM and gives a faster launch than a stock torque converter. Also comes in 1700 and 2000 stall speeds. Rated up to 350 horse power.
How big is the Raptor lock up torque converter?
Power Raptor Lock-up torque converter 700r4 2004r. Fits 700R4, 200-4R and non-LS1 4L60E transmissions. This is a 10 inch torque converter with a 12 inch lock-up carbon fiber clutch rated up to 700 horse power. Can be ordered in stall speeds of 2000 to 4000 RPM.