What is the idle switch on a Nissan Maxima?
Now, since the throttle position sensor assembly, on your 1996-1999 3.0L Nissan Maxima, has two connectors (a brown one and a gray one). You need to know that: The brown wiring harness connector connects to the throttle position sensor portion of the TPS assembly. The gray one connects to the idle switch portion of the TPS assembly.
What does it mean when your engine idle is too low?
If your idle is too low, it could be the IAC not talking to the computer correctly. Disconnect the IAC connector for a couple seconds while your engine is idling. If your engine idle didn’t change, you can suspect it to be the IAC. If it is working properly, unplugging it would cause your idle to freak out.
How can I tell if my idle control valve is working?
To check if an idle control valve is working properly, start by turning on your engine and letting it run for a minute or 2. Then, when it’s at an idling speed, take note of the RPMs in your car. Next, turn the engine off and disconnect the idle control motor under your hood.
What are the pins on the idle switch?
The brown wiring harness connector connects to the throttle position sensor portion of the TPS assembly. The gray one connects to the idle switch portion of the TPS assembly. Using the illustration above, the throttle position sensor assembly pins we’re gonna’ test are labeled with the numbers 5 and 6.
What happens when the idle control valve fails?
When the idle control valve fails it can cause all sorts of issues with the vehicle, and in some cases may even render it undrivable. Usually a bad or failing idle control valve will produce a few symptoms that can alert the driver of a potential issue. 1. Irregular idle speed
If your idle is too low, it could be the IAC not talking to the computer correctly. Disconnect the IAC connector for a couple seconds while your engine is idling. If your engine idle didn’t change, you can suspect it to be the IAC. If it is working properly, unplugging it would cause your idle to freak out.
What should I do if my idle control motor is disconnected?
The engine should still start and run without any issue despite the idle control motor being disconnected. Be sure to tuck the wiring you disconnected up in the engine bay so it doesn’t get caught in any moving parts. Look for a difference in idle speed.
What happens if you have an incorrect ignition code?
The chip in the key transmits a specific code, of which there are millions. If this code matches the ones programmed into the vehicle, engine starting is enabled. An incorrect key code, such as from an unprogrammed key or damaged key, would prevent engine starting. Code “confusion,” such as having multiple keys can also occur, preventing ignition.