What is the dot 3 brake fluid that makes the squeak noise?
The noise may be isolated to the master cylinder area. To correct this concern, remove as much of the old brake fluid from the master cylinder as possible and refill with a new DOT 3 brake fluid, P/N 88862806 (in Canada, use P/N 88862807).
What should I do if I hear a thumping noise on my brakes?
Do this three to five times, while keeping a steady speed; the noise should disappear, or at least be 90% gone. Then drive the car at normal speeds and use the brakes the way you normally would. If the noise has not changed, you may have a different thumping noise than what I have described here in this article.
Why does my car make a noise when I’m not applying the brakes?
If you hear this type of noise when you’re not applying the brakes, have a mechanic do a brake inspection just to be on the safe side. The wear indicator may be warning you that your brake pads are getting low and need to be replaced soon.
Why does my car squeak when I release the brake pedal?
The noise may be isolated to the master cylinder area. Some customers may comment on a squeak noise when the brake pedal is applied or when released. This noise is normally heard when the brake pedal is slowly applied with the engine on or off, but can occur when the brake pedal is released. The noise may be isolated to the master cylinder area.
Why is my hydraulic brake system not working?
I would call this a safety issue, I don’t agree with the dealer there at all. Your conventional (hydraulic) brake system should be working OK but you don’t have ABS or stability control, the vehicle was designed to have these systems active.
The noise may be isolated to the master cylinder area. Some customers may comment on a squeak noise when the brake pedal is applied or when released. This noise is normally heard when the brake pedal is slowly applied with the engine on or off, but can occur when the brake pedal is released. The noise may be isolated to the master cylinder area.
The noise may be isolated to the master cylinder area. To correct this concern, remove as much of the old brake fluid from the master cylinder as possible and refill with a new DOT 3 brake fluid, P/N 88862806 (in Canada, use P/N 88862807).